AIR FOR

WARNING ICONG 001WARNING

This heater shall not be installed in a confined space unless

COMBUSTION

provisions are provided for adequate combustion and ventilation

AND

air. Read the following instructions to insure proper fresh air for

VENTILATION

this and other fuel-burning appliances in your home.

 

Today’s homes are built more energy efficient than ever. New materials, increased

 

 

insulation, and new construction methods help reduce heat loss in homes. Home

 

owners weather strip and caulk around windows and doors to keep the cold air out

 

and the warm air in. During heating months, home owners want their homes as

 

airtight as possible.

 

While it is good to make your home energy efficient, your home needs to breathe.

 

Fresh air must enter your home. All fuel-burning appliances need fresh air for

 

proper combustion and ventilation.

 

Exhaust fans, fireplaces, clothes dryers, and fuel burning appliances draw air from

 

the house to operate. You must provide adequate fresh air for these appliances.

 

This will insure proper venting of vented fuel-burning appliances.

 

PROVIDING ADEQUATE VENTILATION

 

The following is excerpts from National Fuel Gas Code. NFPA 54/ANSI Z223.1,

 

Section 5.3, Air for Combustion and Ventilation.

 

All spaces in homes fall into one of the three following ventilation classifications:

 

1. Unusually Tight Construction; 2. Unconfined Space; 3. Confined Space.

 

The information on pages 5 through 8 will help you classify your space and provide

 

adequate ventilation.

 

Unusually Tight Construction

 

The air that leaks around doors and windows may provide enough fresh air for

 

combustion and ventilation. However, in buildings of unusually tight construction,

 

you must provide additional fresh air.

Unusually tight construction is defined as construction where:

a.walls and ceilings exposed to the outside atmosphere have a continu- ous water vapor retarder with a rating of one perm or less with open- ings gasketed or sealed and

b.weather stripping has been added on openable windows and doors and

c.caulking or sealants are applied to areas such as joints around window and door frames, between sole plates and floors, between wall-ceiling joints, between wall panels, at penetrations for plumbing, electrical, and gas lines, and at other openings.

If your home meets all of the three criteria above, you must provide addi- tional fresh air. See Ventilation Air From Outdoors, page 8.

If your home does not meet all of the three criteria above, continue reading.

Unconfined Space

The National Fuel Gas Code, ANSIZ223.1, 1992, Section 5.3 defines uncon- fined space as having a minimum air volume of 50 cubic feet (127 cubic cm) for each 1000 Btu/Hr input rating of all appliances in the space (cubic feet equals length x width x height of space). Include adjoining rooms only if there are doorless passageways or ventilation grills between the rooms.

Confined Space

The National Fuel Gas Code, ANSIZ223.1, 1992, Section 5.3 defines confined space as having an air volume of less than 50 cubic feet (127 cubic cm) for each 1000 Btu/Hr input rating of all appliances in the space (cubic feet equals length x width x height of space). Include adjoining rooms only if there are doorless passageways or ventilation grills between the rooms.

Continued 5

101827

Page 5
Image 5
Desa CGP26D, CGP16RA installation manual AIR for, Providing Adequate Ventilation

CGP26D, CGP16RA specifications

Desa CGP26D and CGP16RA are powerful and efficient products in the world of portable heating and cooling solutions, catering to various consumer needs. Known for their reliability and user-friendly features, these models have established a solid reputation among users looking for competent climate control.

The CGP26D model stands out for its energy efficiency and advanced heating capabilities. It is designed with a high-performance combustion chamber that maximizes heat output while minimizing fuel consumption. This model utilizes a state-of-the-art thermostat, providing users with precise temperature control to ensure optimal comfort. The CGP26D's compact design makes it an ideal choice for both residential and commercial spaces, allowing users to effectively heat areas without taking up much room. Its portability is further enhanced by the integrated handle and lightweight construction, making it easy to move from one location to another.

In terms of safety features, the CGP26D is equipped with a robust safety shut-off mechanism that activates in case of overheating or accidental tipping, providing peace of mind for users. With a range of heat settings, users can customize the output to suit their specific needs, making it a versatile option for various applications.

On the other hand, the CGP16RA model offers similar benefits but is more focused on cooling solutions. This model incorporates advanced refrigerant technology that facilitates rapid cooling, making it suitable for use in hotter climates. Its energy-efficient compressor operates quietly, ensuring that users can enjoy a cool environment without disruptive noise. The CGP16RA also features multiple cooling modes, allowing users to select the most comfortable setting for their preferences.

Both models come with user-friendly control panels, enabling effortless adjustments and quick access to settings. Energy efficiency is a hallmark of both the CGP26D and CGP16RA, as they are designed to reduce environmental impact while maximizing user comfort. With a blend of modern technology and practical design, these models are perfect for anyone looking to manage indoor climates effectively and sustainably.

In summary, the Desa CGP26D and CGP16RA are impressive products that provide robust heating and cooling solutions, respectively. Their advanced features, energy efficiency, and safety mechanisms make them desirable choices for consumers seeking reliability and convenience in climate control technology. Whether you need to warm up a chilly room or cool down in the summer heat, these Desa models offer the performance and versatility to meet your needs.