OPTIONAL POSITIONING
OF THERMOSTAT
SENSING BULB
Continued
4.The mounting clip must be a minimum of 3" from bottom of fireplace to prevent crimping of capillary. Once you have decided on a location, clean the area thoroughly. Remove the paper backing from the adhesive on back of mounting clip. Press the clip into the new location so that the thermostat sensing bulb will be positioned vertically with the capil- lary at the bottom (see Figure 40). Slide the thermostat sensing bulb into the clip.
IMPORTANT: Do not crimp capillary.
Thermostat |
|
Sensing Bulb | Adhesive- |
| backed |
| Mounting Clip |
Capillary
Do Not Crimp
Capillary
Figure 40 - Positioning the Thermostat Sensing Bulb in the Vertical Position with the Capillary at the Bottom
SPECIFICATIONS
| 18" Model | 18" Model | 24" Model | 24" Model |
| (CGS2718PA) | (CLD3018PTA) | (CGS3124PA) | (CLD3924PTB) |
|
|
| (SGS3124PA) |
|
Btu (Variable) | 16,000/27,000 | 18,000/30,000 | 16,000/31,500 | 20,000/39,000 |
Type Gas | Propane/LP | Propane/LP | Propane/LP | Propane/LP |
Ignition | Piezo | Piezo | Piezo | Piezo |
Manifold Pressure | 8.0" W.C. | 8.0" W.C. | 8.0" W.C. | 8.0" W.C. |
Inlet Gas Pressure (in. of water) |
|
|
| |
Maximum | 14" | 14" | 14" | 14" |
Minimum* | 11" | 11" | 11" | 11" |
Shipping Weight | 27 lbs. | 27 lbs. | 29lbs. | 27 lbs. |
* For the purpose of input adjustment |
|
|
| |
| 18" Model | 18" Model | 24" Model | 24" Model |
| (CGS2718NA) | (CLD3018NTA) | (CGS3124NA) | (CLD3924NTB) |
|
|
| (SGS3124NA) |
|
Btu (Variable) | 16,000/27,000 | 18,000/30,000 | 16,000/31,500 | 20,000/39,000 |
Type Gas | Natural Gas | Natural Gas | Natural Gas | Natural Gas |
Ignition | Piezo | Piezo | Piezo | Piezo |
Manifold Pressure | 3.5" W.C. | 3.5" W.C. | 3.5" W.C. | 3.5" W.C. |
Inlet Gas Pressure (in. of water) |
|
|
| |
Maximum | 10.5" | 10.5" | 10.5" | 10.5" |
Minimum* | 5" | 5" | 5" | 5" |
Shipping Weight | 27 lbs. | 27 lbs. | 29 lbs. | 29 lbs |
* For the purpose of input adjustment
30 | www.desatech.com |