PRODUCT
IDENTIFICATION
Log Set
Burner
Piezo 
Ignitor
Control Knob 
Base 
Grate
Figure 1 - Vent-Free Gas Log Heater
(Logs May Vary by Model, Seasonal Oak
Single Burner Model Shown)
UNPACKING
CAUTION: Do not remove the data plates from the grate as- sembly. The data plates contain
important product information. | |
1. | Remove logs and heater base assembly from |
| carton. Note: Do not pick up heater base as- |
| sembly by burners. This could damage heater. |
| Always handle base assembly by grate. |
2. | Remove all protective packaging applied to |
| logs and heater for shipment. |
3. | Check all items for any shipping damage. If |
| damaged, promptly inform dealer where you |
| bought heater. |
PRODUCT FEATURES
OPERATION
This heater is clean burning. It requires no outside venting. There is no heat loss out a vent or up a chimney. Heat is generated by realistic dancing, yellow flames. This heater is designed for
SAFETY PILOT
This heater has a pilot with an Oxygen Deple- tion Sensing (ODS) safety shutoff system. The ODS/pilot is a required feature for
PIEZO IGNITION SYSTEM
This heater has a piezo ignitor. This system re- quires no matches, batteries or other sources to light heater.
AIR FOR COMBUSTION AND VENTILATION
WARNING: This heater shall not be installed in a confined space or unusually tight con- struction unless provisions are provided for adequate combus- tion and ventilation air. Read the following instructions to insure proper fresh air for this and other
Todayʼs homes are built more energy efficient than ever. New materials, increased insulation and new construction methods help reduce heat loss in homes. Home owners weather strip and caulk around windows and doors to keep the cold air out and the warm air in. During heating months, home owners want their homes as airtight as possible.
While it is good to make your home energy effi- cient, your home needs to breathe. Fresh air must enter your home. All
www.desatech.com | 5 |
