Desa DVF34P Installing Optional Brick Liner D8037A, Attaching Magnetic Decorative Brass Strips

Models: DVF34P DVF34

1 36
Download 36 pages 59.87 Kb
Page 22
Image 22

DVF34, DVF34P

DIRECT-VENT FIREPLACE (NATURAL/PROPANE/LP)

FIREPLACE INSTALLATION

Continued

Attaching Magnetic Decorative Brass Strips

This fireplace comes with a set of two magnetic decorative brass strips. Before attaching strips to fireplace, remove plastic film from brass pieces. After installing the door, attach these strips to the top and bot- tom of the glass door frame.

8.Loosely secure retainer brackets to grate. Brackets are adjustable left to right to allow proper placement of panel. These will hold rear panel in place.

9.Tighten all bracket screws.

10.Follow instructions on page 23 to install logs, lava rock, and ember material.

11.Replace glass door (see page 21).

WARNING: The glass door must be securely in place before running this fireplace. Do not run this fireplace if glass is missing or broken.

INSTALLING OPTIONAL BRICK LINER D8037A

WARNING: If fireplace has been running, turn off and un- plug fireplace. Let cool before installing brick liner.

This brick liner kit is optional. You may purchase brick liner from your local retailer or see Accessories, page 34.

CAUTION: Always handle brick panels with two hands. Do not force brick panels into place. Excessive force will break brick panels.

1.Remove glass door. See Removing/Re- placing Glass Door, pages 21.

2.If installing brick liner in new fireplace, go to step 3. If installing brick liner in an existing fireplace, carefully remove logs, lava rock, and ember material.

3.Install left side brick panel first by slid- ing it between the grate and the side of the firebox (see Figure 44).

4.Slide the left retainer bracket against the left side brick panel. Loosely se- cure the bracket screw. This secures the left side brick panel.

5.Install the right brick panel using the same method described in step 3.

6.Slide the right retainer bracket against the right side brick panel. Loosely se- cure the bracket screw. This secures the right side brick panel.

7.Install rear brick panel. Rest bottom edge of panel on back edge of grate (see Figure 45).

Left Side

Brick Panel

Retainer

Brackets

Figure 44 - Installing Left Side Brick Panel

Rear Brick Panel

Retaining Brackets

Figure 45 - Installing Rear Brick Panel and Retainer Brackets

22

106424

Page 22
Image 22
Desa DVF34P installation manual Installing Optional Brick Liner D8037A, Attaching Magnetic Decorative Brass Strips