Desa FLAME-MAX VintageOak Golden Oak One-Piece Log Set, Installing Vintage Oak Two-Piece Log Set

16

INSTALLATION

Installing Logs (Cont.)

INSTALLATION

Continued

Log #2

Five Piece

Log Set

Log #1

		Middle Section
		at Bottom of
		Log Set
Front Post		Burner
		Chassis
Chassis	Rear Post	“U”-shaped Cutout
		in Chassis
Figure 22 - Installing Vintage Oak Two-Piece Log Set		Figure 24 - Installing Golden Oak One-Piece Log Set
Burner Ports	Two Piece
	Log Set	Burner Ports
		Log Set

Figure 23 - Installing Vintage Oak Two-Piece Log Set (Top View)

Golden Oak One-Piece Log Set

Figure 25 - Installing Golden Oak Log Sets (Top View)

1.Place one-piece log set on grate to fit as illustrated in Figure 24. Make sure middle section at bottom of log set is seated into “U”-shaped cutouts in center of chassis (see Figure 24). IMPORTANT: Make sure log does not cover any burner ports (see Figure 25).

2.Place lava rock around base of heater if desired.

For..com

110399-01B