SERVICE PROCEDURES
Continued
Changing Burner Orifice
1.Shut off gas supply to heater.
2.Remove lower front access panel on heater.
3.Disconnect burner tube from orifice holder (see Figure 20).
4.Remove orifice holder from burner (see Figure 20).
5.Use socket or
6.Clean and replace orifice, or replace with new orifice.
7.Turn on gas to heater and check for gas leaks. Apply a mixture of liquid soap and water to all joints. Bubbles forming show a leak. Correct all leaks at once.
8.Replace lower front access panel.
BLOWER
WIRING
Burner
Orifice
Burner
Tube
Orifice
Holder
Figure 20 - Orifice Location (35,000 BTU/Hr Burner Shown)
Figure 21 - Orifice
Fan Switch
(Off/On/Auto)
Auto
Off
On
Red
Fan
DIAGRAM
(For Models With Blower Assembly)
30
Black Blue
110/115 V.A.C.
Black
White
Green
Switch (N.O.)
Black
Blower
Motor
Red
White
100749