INSTALLATION

Installing Heater Base Assembly (Cont.) Installing Batteries for Remote Receiver and Hand-Held Remote Control

11

INSTALLATION

Continued

5.Center heater base and logs front-to-back and side-to-side in fireplace.

6.Carefully remove logs without moving heater base.

7.Mark screw locations through one hole on each side of the base (see Figure 12). If installing in a brick-bottom fireplace, mark screw locations in mortar joint of bricks.

8.Drill holes at marked locations using 3/16" drill bit.

9.Attach base assembly to fireplace floor using two masonry screws (in hardware package).

Masonry

Screw

Screw Holes

in Base

Figure 12 - Attaching Heater to Fireplace Floor

INSTALLING BATTERIES FOR REMOTE RECEIVER AND HAND HELD REMOTE CONTROL

Four AA batteries and three AAA batteries are required to operate this heater with the wireless hand-held remote control set. Four AA batteries must be installed in the receiver and three AAA batteries in the hand-held remote control unit. Note: Only use alkaline batteries.

Installing Batteries in Receiver

1.Locate slot on battery cover of receiver (see Figure 13). Firmly insert tool such as a small screwdriver, butter knife, or dime into the slot and lift up to remove cover.

2.Insert 4 AA batterines into receiver. Positive and negative are marked inside receiver casing. Note: Receiver will not func- tion if batteries are not installed correctly.

3.Slide tab on cover into receiver housing and snap cover back into place.

Cover

4 AA

Batteries

Slot

Battery

Housing

Receiver

Backup

Switch

Figure 13 - Installing Batteries in Receiver

Installing Battery into Remote

1.Remove remote cover (see Figure 14).

2.Insert 3 AAA batteries into remote control (see Figure 14). Positive and negative are marked inside remote control cas- ing. Note: Remote will not function if batteries are not in- stalled correctly.

3.Slide remote cover back into place.

3 AAA Batteries

Cover

Remote

Control

Figure 14 - Installing Batteries in Remote Control

For morevisit www..com

111515-01A

Page 10 Page 12
Page 11
Image 11
Desa LDL3924NR installation manual Installing Batteries in Receiver, Installing Battery into Remote
Page 10 Page 12

LDL3924NR specifications

Desa LDL3924NR is a state-of-the-art model that embodies innovative technology and advanced features aimed at providing optimal performance in its class. This model is particularly designed for users who demand reliability and efficiency in their operations.

One of the standout features of the Desa LDL3924NR is its high-performance engine. Designed to deliver excellent power output, this engine ensures that operations are smooth and efficient, making it suitable for a variety of tasks. The power-to-weight ratio is optimized, which provides the user with enhanced control and responsiveness, ensuring that even the most demanding applications can be tackled with ease.

The design of the Desa LDL3924NR incorporates advanced materials, which not only contribute to its durability but also help in reducing maintenance requirements. This characteristic is particularly beneficial for users who prioritize longevity and reliability in their equipment. Moreover, the ergonomic design ensures that the model is user-friendly, allowing operators of varying skill levels to handle it with confidence.

In terms of technology, the Desa LDL3924NR is equipped with a sophisticated control system that monitors performance metrics in real time. This technology provides users with insights into efficiency and operational status, empowering them to make informed decisions that can enhance productivity. Additionally, the model is designed with safety features that prioritize operator well-being, minimizing risks and ensuring compliance with industry standards.

Another key characteristic of the Desa LDL3924NR is its versatility. It performs reliably across different settings, whether in industrial, agricultural, or commercial environments. This multifunctionality makes it an attractive option for a diverse range of users.

In conclusion, the Desa LDL3924NR stands out due to its powerful engine, durable construction, innovative technology, and safety features. Its versatility allows it to adapt to various applications, making it an indispensable tool for professionals seeking efficiency and reliability. With its commitment to quality and performance, the Desa LDL3924NR is poised to meet the growing demands of users across multiple sectors.
Top Page Image Contents