Desa NATURAL GAS LOG HEATER Optional Positioning Of Thermostat Sensing Bulb, Continued

Figure 34 - Positioning the Thermostat Sensing Bulb in the Vertical Position

with the Capillary at the Bottom

Thermostat

Sensing Bulb

Adhesive-backed Mounting Clip

Figure 31 - Locating Thermostat Sensing Bulb on Masonry Fireplace

If you have a factory-built metal fireplace, see Figure 32 for location.

Thermostat

Sensing Bulb

Adhesive-backed Mounting Clip

Figure 32 - Locating Thermostat Sensing Bulb on Factory-built Metal Fireplace

If your fireplace has glass doors, position sensing bulb directly behind door gap on right bottom side (see Figure 33).

Thermostat

Sensing Bulb

Adhesive-backed

Mounting Clip

Glass

Doors

Figure 33 - Installing Thermostat Sensing Bulb behind Glass Doors

OPTIONAL

POSITIONING

OF THERMOSTAT

SENSING BULB

For Masonry and

Factory-built

Metal Fireplace

Continued

5. The mounting clip must be a minimum of 3" from bottom of fireplace to prevent crimping of capillary. Once you have decided on a location, clean the area thoroughly. Remove the paper backing from the adhesive on back of mounting clip. Press the clip into the new location so that the thermostat sensing bulb will be positioned vertically with the capillary at the bottom (see Figure 34). Slide

the thermostat sensing bulb into the clip.
IMPORTANT: Do not crimp capillary.	Thermostat
	Sensing Bulb
	Adhesive-backed
Capillary	Mounting Clip
	Do Not Crimp Capillary

30

101308