INSTALLATION
Log Placement for P325E/VP325E Models
13
INSTALLATION
Continued
LOG PLACEMENT FOR P325E(B)/VP325E(B)
MODLES
1.Place large back log (log 1) onto grate making sure notches rest over grate (see Figure 24).
2.Place log 2 onto front right side of grate. Gently insert peg on back of log 2 into hole on right front of log 1 (see Figure 24).
3.Insert peg on back of log 3 into hole on left front of log 1 (see Figure 25). Log 3 will rest between first two grate fingers on left of grate assembly (see Figure 25)
Log 1
Log 2
Figure 24 - Installing Logs 1 and 2
Log 3
Log 1
Figure 25 - Installing Log 3
4.Insert peg on back of log 4 into hole on top left of log 1. Rest the front of log 4 on the grate as shown in Figure 26.
5.Insert peg on back of log 5 into hole on the top right of log 1 (see Figure 26). Rest the bottom of log 5 on grate as shown in Figure 27.
To enhance the look of the hearth you may optionally place the lava rock provided around the front and sides of the burner.
NOTICE: Do not put lava rock inside the burner pan or around the air mixer fitting. Placing lava rock inside the burner pan or blocking the openings of the propane/LP
Log 5
Log 4
Log 3
Log 1
Figure 26 - Installing Logs 4 and 5
Figure 27 - Logs Installed
For more information, visit www.desatech.com
108794