INSTALLATION

For easy installation, select an existing light operated by a wall switch for replacement.

For best performance, mount the fixture about 8 ft. (2.4 m) above the ground.

CAUTION: Keep the sensor at least 1" (2.5 cm) away from the lamps.

CAUTION: To Avoid Fire Or Burn Hazards:

Allow fixture to cool before touching. The bulb and the fixture operate at high temperatures.

Keep fixture at least 2" (5 cm) from combustible materi- als. Do not aim at objects closer than 3 feet. (1 m).

Use only T3, 150W (max.) tungsten halogen 120 VAC lamps.

WIRE THE LIGHT CONTROL.

Turn power off at the fuse or circuit breaker.

Remove the existing light fixture.

Install mounting strap to junction box using screws appropriate for your junction box.

The plastic hanger can be used to hold the fixture while wiring. The small end of the plastic hanger can be threaded through the hole in the center of the cover plate. The small end then goes into one of the slots on the mounting strap.

Thread all fixture wires through the large holes in the gasket as shown.

Connect the junction box wires to the light fixture wires as shown. Twist together and secure with wire connectors.

For under eave installation, the sensor head must be rotated as shown in the next two steps for proper operation and to avoid the risk of electrical shock. Also for proper under eave operation, remove the protective backing from the Light Shield and stick on as shown below.

For eave mount only:

Swing the sensor head towards the clamp screw joint.

Controls

Clamp Screw

Black to Black

White to White

Gasket

Rubber Plug

Mounting

Bolt

Then rotate the sensor head clockwise 180° so the controls face down.

Controls

Light Shield

Opening

Controls

If the sensor pops out of the ball joint, loosen the clamp screw and push the sensor back into the ball joint. Tighten the clamp screw when done.

BULB INSTALLATION.

NOTE: Lamps are included, but you will need to install them

NOTE: When re-lamping, turn power off and let the fixture cool.

Open glass covers. To remove the old bulb push the bulb towards the right (with fixture as shown) until the left side of the bulb is clear of the left socket.

To install a bulb, push the bulb into the right socket so the bulb fits completely into the left socket.

Check that the bulb is seated properly.

Close the glass covers.

Connect any fixture ground wire(s) and the cover plate ground screw to the junction box ground wire.

MOUNT THE LIGHT CONTROL.

Place the Mounting Bolt through the front of the junction box cover. Push the small gasket hole over the Mounting Screw.

Make sure the wire connectors and wires are inside the junction box. Align the Mounting Screw with the center hole in the Mounting Strap.Secure the fixture to the Mounting Strap.

Push the Rubber Plug over the mounting screw.

Keep lamps at least 1" (2.5 cm) from the sensor.

Push the Rubber Plug firmly into place.

If not installed on a weatherproof box, caulk the wall plate and mounting surface with silicone

Adjust the lamp holders by loosening the lock nuts but do not rotate the lamp holders more than 180° from the factory setting.

2

595-5575-06

Page 2
Image 2
Desa SL-5512 manual Wire the Light Control, Bulb Installation, Mount the Light Control

SL-5512 specifications

Desa SL-5512 is a state-of-the-art device designed for efficiency and functionality in various applications. As a versatile solution within its category, the SL-5512 stands out due to its combination of advanced technology and user-centric features.

At the heart of the SL-5512 is its powerful processor, which ensures seamless performance across multiple tasks. This is complemented by its capacity for quick data processing, allowing for real-time analytics and decision-making. The device leverages cutting-edge artificial intelligence algorithms to enhance its operational efficiency, enabling users to automate routine processes and focus on more strategic activities.

One of the most notable features of the Desa SL-5512 is its advanced connectivity options. It supports a wide range of connectivity protocols, including Bluetooth, Wi-Fi, and Ethernet. This is crucial for environments where seamless communication with other devices and networks is essential. Furthermore, its compatibility with various operating systems makes it an ideal choice for diverse organizational needs.

In terms of user interface, the SL-5512 is designed for ease of use. It comes equipped with an intuitive touch display that allows users to navigate functions quickly and efficiently. Customizable settings enable users to tailor the interface to fit specific requirements, enhancing the overall user experience.

The durability of the SL-5512 is another significant aspect that cannot be overlooked. Constructed from high-quality materials, this device is built to withstand the rigors of everyday use while maintaining optimal performance. Its robust design makes it suitable for deployment in challenging environments, further extending its range of applications.

Moreover, the SL-5512 incorporates advanced security features to protect sensitive information. Equipped with encryption technologies and secure access protocols, it ensures that data remains safe from unauthorized access, thereby instilling users with confidence in its reliability.

In conclusion, the Desa SL-5512 serves as a prime example of innovation and practicality in its field. With a combination of powerful processing capabilities, versatile connectivity options, user-friendly design, and strong security features, it addresses the multifaceted needs of modern users, positioning itself as a leading choice in its category. Whether used in professional settings or broader commercial applications, the SL-5512 is engineered to deliver outstanding performance and reliability.