PRODUCT

IDENTIFICATION

Log Set

Piezo

 

 

Ignitor

Flame

Chassis

Control

Adjustment

Assembly

Knob

Knob

 

 

 

Figure 1 - Product Identification

LOCAL CODES

Install and use the heater with care. Follow all local codes. In the absence of local codes, use the latest edition of the National Fuel Gas Code ANSI Z223.1/NFPA 54*

*Available from:

American National Standards Institute, Inc. 1430 Broadway New York, NY 10018

National Fire Protection Association, Inc. Battery march park Quincy, MA 02269

Note: Where listed vented decorative logs are required, thermostat operations is not permitted. The installation of appliances designed for manu- factured home (U.S. only) or mobile home instal- lation must conform with the Standard CAN/CSA Z240 MH, Standard, Title 24 CFR, Part 3280, in the United States or when such a Standard is not applicable, ANSI/NCSBCS A225.1/NFPA 501A Manufactured Home Installations Standard.

State of Massachusetts: The installation must be made by a licensed plumber or gas fitter in the Commonwealth of Mas- sachusetts.

Sellers of unvented propane or natural gas-fired supplemental room heaters shall provide to each purchaser a copy of 527 CMR 30 upon sale of the unit.

Vent-free gas products are prohibited for bedroom and bathroom installation in the Commonwealth of Massachusetts.

UNPACKING

CAUTION: Do not remove the data plates from the grate as- sembly. The data plates contain important warranty and safety information.

1.Remove log set assembly from carton. Note: Do not pick up assembly by logs. This could damage the unit. Always handle assembly by grate.

2.Remove all protective packaging applied to log set for shipment.

3.Check all items for any shipping damage. If damaged, promptly inform dealer where you bought appliance.

OPTIONAL REMOTE

CONTROL ACCESSORIES

There are four optional remote controls that can

be purchased separately:

Wall switch

Hand-held ON/OFF remote

Wall thermostat

Hand-held thermostat remote

See Accessories, page 27

The wall thermostat or hand-held thermostat may not

be used where vented decorative listings is required.

PRODUCT FEATURES

OPERATION

 

This heater is clean burning. It requires no outside

venting. There is no heat loss out a vent or up a

chimney. Heat is generated by both realistic flames

and glowing coals. This heater is designed for

vent-free operation with flue damper closed. It

has been tested and approved to ANSI Z21.11.2

standard for unvented heaters. State and local

codes in some areas prohibit the use of vent-free

heaters. This heater may also be operated as a

vented decorative (ANSI Z21.60) product by

opening the flue damper.

SAFETY DEVICE

This heater has a pilot with an Oxygen Deple-

tion Sensing (ODS) safety shut off system. The

ODS/pilot is a required feature for vent-free room

heaters. The ODS/pilot shuts off the heater if there

is not enough fresh air.

PIEZO IGNITION SYSTEM

This heater has a piezo ignitor. This system re-

quires no matches, batteries or other sources to

light heater.

 

114744-01B

www.desatech.com

5

Page 5
Image 5
Desa SMA18VPA, SBJ24VNA, SBJ18VPA, SMA24VNA installation manual Product Identification, Local Codes, Unpacking

SMA24VNA, SBJ18VPA, SBJ24VNA, SMA18VPA, SBJ24VNA, SBJ24VPA, SMA24VNA, SMA24VPA, SBJ18VNA, SBJ18VPA, SMA18VNA, SMA18VPA specifications

Desa SMA18VPA, SMA24VNA, SBJ24VNA, SBJ24VPA, SMA24VNA, SMA24VPA, SBJ18VNA, SBJ18VPA, SMA18VNA, and SMA18VPA represent a series of advanced technologies in the field of energy production and consumption. These models are integral to the development of sustainable energy solutions and stand out for their innovative features.

One of the main features shared by all these models is their ability to optimize energy efficiency. They are designed with smart energy management systems that monitor and control energy distribution effectively. This ensures that energy consumption is minimized while maximizing output, making them ideal for both residential and commercial applications.

SMA18VPA and SMA24VNA are both characterized by high-performance inverters that convert DC electricity from solar panels into AC electricity. These models utilize cutting-edge inverter technology which increases energy yield even in partial shading conditions. Similarly, SBJ series, including SBJ24VNA and SBJ18VNA, emphasize modularity and flexibility, allowing users to expand their systems according to changing energy needs.

In terms of connectivity, these models are equipped with advanced communication protocols. This includes Wi-Fi and Ethernet options, which facilitate real-time monitoring and remote management through user-friendly mobile applications. Users can seamlessly track their energy production, consumption, and savings on their smartphones or tablets.

Another notable characteristic is the emphasis on durability and reliability. The materials used in these constructions are often weather-resistant, ensuring longevity and reducing maintenance costs over time. For instance, SMA24VPA utilizes robust casing that protects internal components from environmental damage.

Furthermore, these systems are designed to be environmentally friendly. Many of the models boast certifications that confirm their compliance with international environmental standards, promoting a sustainable approach to energy consumption.

In terms of scalability, the Desa series stands out. Users can start with a smaller setup and gradually expand as their energy needs grow. This adaptability makes these models suitable for a wide range of applications from small homes to larger industrial installations.

In conclusion, Desa SMA18VPA, SMA24VNA, SBJ24VNA, SBJ24VPA, SMA24VNA, SMA24VPA, SBJ18VNA, SBJ18VPA, SMA18VNA, and SMA18VPA are at the forefront of energy technology. With their energy efficiency, advanced connectivity features, durability, environmental responsibility, and scalability, they offer optimal solutions for modern energy demands, paving the way for a more sustainable future.