C-clockwise

OPERATING

4. Wait five (5) minutes to clear out any gas. Then smell for gas, including

near the floor. If you smell gas, STOP! Follow “B” in the safety information

HEATER

at the top of page 20. If you don’t smell gas, go to the next step.

Model VN2000BA

 

 

Continued

5. Press in control knob and turn counterclockwise

C-clockwise to the PILOT

 

position. Keep control knob pressed in for five (5) seconds (see Figure 18).

 

Note: You may be running this heater for the first time after hooking up

 

to gas supply. If so, the control knob may need to be pressed in for 30

 

seconds. This will allow air to bleed from the gas system.

 

• If control knob does not pop up when released, contact a qualified

 

service person or gas supplier for repairs.

 

 

6. With control knob pressed in, push down and release ignitor button. This

 

will light pilot. The pilot is attached to the front of burner. The pilot can be

 

seen through the glass panel. If needed, keep pressing ignitor button until

 

pilot lights.

 

 

Note: If pilot does not stay lit, refer to Troubleshooting, pages 24 through

 

27. Also contact a qualified service person or gas supplier for repairs.

 

Until repairs are made, light pilot with match. To light pilot with match,

 

see Manual Lighting Procedure, page 22.

 

 

Ignitor Electrode

 

Thermocouple

Pilot Burner

Figure 19 - Pilot

7.Keep control knob pressed in for 30 seconds after lighting pilot. After 30 seconds, release control knob.

Note: If pilot goes out, repeat steps 3 through 7.

8. Turn control knob counterclockwise to the LOW position. The main burner should light. Set control knob to any heat level between HIGH and LOW. To turn control knob from LOW to a higher setting, press in the

control knob and turn counterclockwise C-clockwise .

Note: Both HIGH and LOW are locked positions. You must press in control knob before turning it from these positions.

CAUTION

WARNING ICONG 001

Do not try to adjust heating levels by using the manual shutoff valve.

Continued 21

099570

Page 20 Page 22
Page 21
Image 21
Desa VN2800BTA, VN2000BTA installation manual Model VN2000BA
Page 20 Page 22

VN2000BA, VN2000BTA, VN2800BTA specifications

Desa VN2800BTA, VN2000BTA, and VN2000BA are three models of innovative heating solutions that embody advanced technology and comfort for residential and commercial use. These models are designed to provide efficient heating in various settings, ensuring warmth during the colder months while prioritizing user convenience and energy savings.

The VN2800BTA model stands out for its impressive heating capacity, making it suitable for larger spaces. It features a powerful output, capable of quickly warming a room while maintaining a consistent temperature. This model utilizes a user-friendly thermostat that allows for precise temperature control, ensuring optimal comfort without unnecessary energy consumption.

In contrast, the VN2000BTA and VN2000BA are designed for medium-sized areas, offering flexibility in different room configurations. Both models incorporate similar technological features, such as electronic ignition systems that enhance reliability and convenience. Owners can benefit from quick heat-up times, ensuring their environment remains cozy and inviting.

One of the defining characteristics of all three models is their commitment to safety. Each unit is equipped with built-in safety features, including oxygen depletion sensors and automatic shut-off mechanisms. These technologies provide peace of mind for users, allowing them to enjoy their heating systems without concern for safety hazards.

Additionally, all three models are designed with energy efficiency in mind. They utilize advanced combustion technologies that optimize fuel usage, resulting in reduced operational costs over time. This not only benefits the user financially but also contributes to lower environmental impact, aligning with modern sustainability goals.

In terms of aesthetics, the VN2800BTA, VN2000BTA, and VN2000BA models offer a sleek design that can blend seamlessly into any décor. The options for venting make installation versatile and adaptable to different home layouts, allowing for a customized heating solution.

Furthermore, the user experience is enhanced through easy-to-read displays and intuitive controls. This modern interface gives users a seamless interaction with their heating system, making adjustments a simple task.

Overall, Desa VN2800BTA, VN2000BTA, and VN2000BA models combine efficiency, safety, and style, making them an excellent choice for anyone looking to enhance their indoor comfort during chilly weather. With their robust features and user-focused design, these models set a high standard in the heating appliance market.
Top Page Image Contents