INSTALLING TO WALL

Continued

4.For thin walls (1/2" or less), insert red key into wall anchor. Push red key to “pop” open anchor wings. IMPORTANT: Do not hammer key!

For thick walls (over 1/2" thick) or solid walls, do not pop open wings.

Figure 10 - Popping Open Anchor Wings For Thin Walls

5.Place mounting bracket onto wall. Line up last hole on each end of bracket with wall anchors.

6.Insert mounting screws through bracket and into wall anchors.

7.Tighten screws until mounting bracket is firmly fastened to wall.

Placing Heater On Mounting Bracket

1.Locate two horizontal slots on back panel of heater.

2.Place heater onto mounting bracket. Slide horizontal slots onto stand-out tabs on mounting bracket.

Stand-Out Tab

Horizontal Slots

Mounting Bracket (attached to wall)

Figure 11 - Mounting Heater Onto Mounting Bracket

Installing Bottom Mounting Screws

1.Locate two bottom mounting holes. These holes are near bottom on back panel of heater (see Figure 12).

2.Mark screw locations on wall.

3.Remove heater from mounting bracket.

4.If installing bottom mounting screws into hollow or solid wall, install wall anchors. Follow steps 1 through 4 under Attaching To Wall Anchor Method, page 12.

If installing bottom mounting screw into wall stud, drill holes at marked loca- tions using 9/64" drill bit.

5.Replace heater onto mounting bracket.

6.Place spacers between bottom mounting holes and wall anchor or drilled hole.

7.Hold spacer in place with one hand. With other hand, insert mounting screw through bottom mounting hole and spacer. Place tip of screw in opening of wall anchor or drilled hole.

8.Tighten both screws until heater is firmly secured to wall. Do not over tighten. Note: Do not replace front panel at this time. Replace front panel after making gas connections and checking for leaks. (see pages 14-16)

Figure 12 - Installing Bottom Mounting Screws

099570

13

Page 12 Page 14
Page 13
Image 13
Desa VN2000BA, VN2800BTA, VN2000BTA installation manual Placing Heater On Mounting Bracket, Installing Bottom Mounting Screws
Page 12 Page 14

VN2000BA, VN2000BTA, VN2800BTA specifications

Desa VN2800BTA, VN2000BTA, and VN2000BA are three models of innovative heating solutions that embody advanced technology and comfort for residential and commercial use. These models are designed to provide efficient heating in various settings, ensuring warmth during the colder months while prioritizing user convenience and energy savings.

The VN2800BTA model stands out for its impressive heating capacity, making it suitable for larger spaces. It features a powerful output, capable of quickly warming a room while maintaining a consistent temperature. This model utilizes a user-friendly thermostat that allows for precise temperature control, ensuring optimal comfort without unnecessary energy consumption.

In contrast, the VN2000BTA and VN2000BA are designed for medium-sized areas, offering flexibility in different room configurations. Both models incorporate similar technological features, such as electronic ignition systems that enhance reliability and convenience. Owners can benefit from quick heat-up times, ensuring their environment remains cozy and inviting.

One of the defining characteristics of all three models is their commitment to safety. Each unit is equipped with built-in safety features, including oxygen depletion sensors and automatic shut-off mechanisms. These technologies provide peace of mind for users, allowing them to enjoy their heating systems without concern for safety hazards.

Additionally, all three models are designed with energy efficiency in mind. They utilize advanced combustion technologies that optimize fuel usage, resulting in reduced operational costs over time. This not only benefits the user financially but also contributes to lower environmental impact, aligning with modern sustainability goals.

In terms of aesthetics, the VN2800BTA, VN2000BTA, and VN2000BA models offer a sleek design that can blend seamlessly into any décor. The options for venting make installation versatile and adaptable to different home layouts, allowing for a customized heating solution.

Furthermore, the user experience is enhanced through easy-to-read displays and intuitive controls. This modern interface gives users a seamless interaction with their heating system, making adjustments a simple task.

Overall, Desa VN2800BTA, VN2000BTA, and VN2000BA models combine efficiency, safety, and style, making them an excellent choice for anyone looking to enhance their indoor comfort during chilly weather. With their robust features and user-focused design, these models set a high standard in the heating appliance market.
Top Page Image Contents