CONNECTING TO GAS SUPPLY

NOTICE

A qualified service person must connect heater to gas supply. Follow all local codes.

WARNING

WARNING ICON

G 001

Never connect heater to private (non-utility) gas well. This gas is commonly known as well-head gas.

IMPORTANT: Check gas line pressure before connecting heater to gas line. Gas line pressure must be no greater than 14 inches of water. If gas line pressure is higher, heater regulator damage could occur.

CAUTION

WARNING ICON

G 001

Use only new, black iron or steel pipe. Internally-tinned copper tubing may be used in certain areas. Check your local codes. Use pipe of large enough diameter to allow proper gas volume to heater. If pipe is too small, undue loss of pressure will occur.

Typical Pipe Diameters

VN2000BA or VN2000BTA

3/8" or greater

VN2800BTA

1/2" or greater

Installation must include a manual shutoff valve, union, and plugged 1/8" NPT tap. Locate NPT tap within reach for test gauge hook up. NPT tap must be upstream from heater (see Figure 13, page 15).

Apply pipe joint sealant lightly to male threads. This will prevent excess sealant from going into pipe. Excess sealant in pipe could result in clogged heater valves.

CAUTION

WARNING ICON

G 001

Use pipe joint sealant that is resistant to natural gas.

Install sediment trap in supply line as shown in Figure 13, page 15. Locate sediment trap where it is within reach for cleaning. Locate sediment trap where trapped matter is not likely to freeze. A sediment trap traps moisture and contaminants. This keeps them from going into heater controls. If sediment trap is not installed or is installed wrong, heater may not run properly.

14

099570

Page 14
Image 14
Desa VN2000BTA, VN2800BTA, VN2000BA Connecting to GAS Supply, Use pipe joint sealant that is resistant to natural gas

VN2000BA, VN2000BTA, VN2800BTA specifications

Desa VN2800BTA, VN2000BTA, and VN2000BA are three models of innovative heating solutions that embody advanced technology and comfort for residential and commercial use. These models are designed to provide efficient heating in various settings, ensuring warmth during the colder months while prioritizing user convenience and energy savings.

The VN2800BTA model stands out for its impressive heating capacity, making it suitable for larger spaces. It features a powerful output, capable of quickly warming a room while maintaining a consistent temperature. This model utilizes a user-friendly thermostat that allows for precise temperature control, ensuring optimal comfort without unnecessary energy consumption.

In contrast, the VN2000BTA and VN2000BA are designed for medium-sized areas, offering flexibility in different room configurations. Both models incorporate similar technological features, such as electronic ignition systems that enhance reliability and convenience. Owners can benefit from quick heat-up times, ensuring their environment remains cozy and inviting.

One of the defining characteristics of all three models is their commitment to safety. Each unit is equipped with built-in safety features, including oxygen depletion sensors and automatic shut-off mechanisms. These technologies provide peace of mind for users, allowing them to enjoy their heating systems without concern for safety hazards.

Additionally, all three models are designed with energy efficiency in mind. They utilize advanced combustion technologies that optimize fuel usage, resulting in reduced operational costs over time. This not only benefits the user financially but also contributes to lower environmental impact, aligning with modern sustainability goals.

In terms of aesthetics, the VN2800BTA, VN2000BTA, and VN2000BA models offer a sleek design that can blend seamlessly into any décor. The options for venting make installation versatile and adaptable to different home layouts, allowing for a customized heating solution.

Furthermore, the user experience is enhanced through easy-to-read displays and intuitive controls. This modern interface gives users a seamless interaction with their heating system, making adjustments a simple task.

Overall, Desa VN2800BTA, VN2000BTA, and VN2000BA models combine efficiency, safety, and style, making them an excellent choice for anyone looking to enhance their indoor comfort during chilly weather. With their robust features and user-focused design, these models set a high standard in the heating appliance market.