WS26CP and WD26CPA
Wall Mantel with Base and Trim
ASSEMBLY AND INSTALLATION INSTRUCTIONS
Firebox | |||
Perimeter | |||
Trim | Included | ||
| This | ||
With | |||
| |||
Mantel |
Important: Read entire instruction sheet before as- sembling or installing mantel kit.
This mantel is only approved for use with any DESA Heating Products 26" fireplace system. Do not use mantel with any other product.
• Mantel pieces - unassembled and marked as follows:
| Base #1 | Left Front Leg #5 with arrow |
| Right Side #2 with arrow | Header #6 with arrow |
| Right Front Leg #3 with arrow | Top #7 |
| Left Side #4 with arrow |
|
• | Hardware package | |
• | Trim kit | GAB6094 |
• | Trim kit hardware | |
• | Bracket hardware kit |
The hardware package
•2 - 3" screws
•18 - 1 1⁄4" screws
The bracket hardware kit
•13 - Brackets
•2 - Flat brackets
•36 - Wood screws
Tools and items required:
•#2 Phillips driver bit (3 1/2" minimum length)
•Slotted screw driver
•Measuring tape
•Pencil
•Drill Driver
If any wood pieces are missing or damaged, contact the dealer where you purchased this mantel for replacement. If hardware or trim is missing or damaged, contact DESA Heating Products at
Note: Gather all mantel pieces together before assembling mantel.
WARNING: Only use 1 1/4" screws in pocket holes to assemble mantel. Damage to mantel will result if other screws are used for this purpose.
WARNING: Use only 1/2" or 3/4" screws with brack- ets in hardware pack
www.desatech.com