![Installing Fireplace](/images/new-backgrounds/54227/542277x1.webp)
Installing Fireplace
1.Fireplace should be fully assembled. See Assembling Fireplace in fireplace owner’s manual.
2.Install gas line. See Connecting To Gas Supply in fire- place owner’s manual. Remember to leave access to the gas shutoff valve somewhere on the base or where it is accessible to the user.
3.Check for leaks. See Checking Gas Connections in fireplace owner’s manual.
4.Position firebox inside mantel, carefully positioning gas lines (see Figure 9). IMPORTANT: Use caution when positioning fireplace on mantel base. Base may scratch easily.
5.Place trim kit on the shoulder screws located on the side and top of the fireplace. Firmly snap the trim over the shoulder screws on fireplace (see Figure 9). Align fireplace in mantel assembly so that the trim overlaps the mantel evenly on all three sides.
6.Lower bottom louver door. Use two 3" wood screws pro- vided in hardware package and attach fireplace base to wooden base (see Figure 10). Close louver door.
Shoulder
Screw
Assembled
Trim
Bottom Louver
Door
Hole for Attaching
Fireplace to Wooden
Mantel Base
Figure 10 - Attaching Fireplace to Mantel Base
Figure 9 - Inserting Fireplace Into Cabinet Mantel
2701 Industrial Drive
P.O. Box 90004
Bowling Green, KY
Technical Service and Parts:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Rev. B | |
119793 01 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||||||||||||||||
|
| 09/06 | ||||||||||||||||||||||||||||||||||||||||||
NOT A UPC | ||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|