SAFETY INFORMATION

Continued

4.This heater shall not be installed in a bedroom or bathroom.

5.Do not place stove directly on carpeting, vinyl tile or any combustible material other than wood. The stove must set on a metal or wood panel extending the full width and depth of the appliance.

6.Do not use this stove as a wood burning fire- place. Use only model 111485-02/111485-01 vent-free gas log heater.

7.Do not add extra logs or ornaments such as pine cones, vermiculite or rock wool. Using these added items can cause sooting.

8.This log heater is designed to be smokeless. If logs ever appear to smoke, turn off heater and call a qualified service person. Note: During initial operation, slight smoking could occur due to log curing and heater burning manu- facturing residues.

9.To prevent the creation of soot, follow the instructions in Cleaning and Maintenance, page 14.

10.Before using furniture polish, wax, carpet cleaners or similar products, turn heater off. If heated, the vapors from these products may create a white powder residue within burner box or on adjacent walls or furniture.

11.This heater needs fresh, outside air ventilation to run properly. This heater has an Oxygen Deple- tion Sensing (ODS) safety shutoff system. The ODS shuts down the heater if not enough fresh air is available. See Air for Combustion and Ventilation, page 5. If heater keeps shutting off, see Troubleshooting, page 16.

12.Do not run heater

where flammable liquids or vapors are used or stored

when under dusty conditions

13.Do not use this stove to cook food or burn paper or other objects.

14.Do not use heater if any part has been exposed to or under water. Immediately call a qualified service technician to inspect the room heater and to replace any part of the control system and any gas control which has been under water.

15.Do not operate heater if any log is broken. Do not operate heater if a log is chipped (dime- sized or larger).

16.Turn heater off and let cool before servicing. Only a qualified service person should service and repair heater.

17.Operating heater above elevations of 4,500 feet could cause pilot outage.

18.For propane/LP units, do not use propane/LP tank of less than 100 lb. capacity.

19.Provide adequate clearances around air openings.

20.Screen must be completely closed before using heater. Never run heater with screen open.

PRODUCT

IDENTIFICATION

One Piece Log Set

Stove Inside Stove Cavity

Body

Screen

Stove Door

Piezo

Control

(Shown in the

Ignitor

Knob

open position)

 

 

Figure 1 - Typical Stove Cabinet Model with Comfort Glow Gas Log Heater

LOCAL CODES

Install and use heater with care. Follow all local codes. In the absence of local codes, use the lat- est edition of The National Fuel Gas Code ANSI Z223.1/NFPA 54*.

*Available from:

American National Standards Institute, Inc. 1430 Broadway New York, NY 10018

National Fire Protection Association, Inc. Batterymarch Park Quincy, MA 02269

4

www.desatech.com

111487-01D

Page 4
Image 4
Desa Tech CSPBPT, CSBNT, CSPINT, CSBPT Product Identification, Local Codes, Provide adequate clearances around air openings

CSPBPT, CSPINT, CSPIPT, CSBPT, CSBNT specifications

Desa Tech CSPBNT, CSBNT, CSBPT, CSPIPT, and CSPINT represent a suite of advanced technologies tailored for innovative applications in various sectors, notably in communications, security, and data processing. Each product within this family boasts unique features while sharing common underlying technologies, making them indispensable tools in modern technological landscapes.

Desa Tech CSPBNT, short for Communication Signal Processing in Broadband Networks Technology, focuses on enhancing connectivity and bandwidth efficiency. Its main feature is the ability to optimize signal transmission over long distances, ensuring minimal data loss and latency. This technology employs advanced modulation techniques and error correction algorithms, which not only improve overall network reliability but also expand the range of serviceable areas in both urban and rural settings.

CSBNT, the Communication Security Broadband Network Technology, prioritizes data integrity and security. Featuring robust encryption protocols and real-time monitoring systems, CSBNT is engineered to protect sensitive information from cyber threats. Its adaptive security layers allow organizations to tailor their defenses based on evolving threat landscapes, making it an essential tool for industries handling confidential data.

CSBPT, or Communication Signal Booster Processing Technology, enhances signal strength and quality in weak reception areas. This technology utilizes smart antennas and digital signal processing to amplify weak signals and filter out noise, providing a stable communication line even in challenging environments. Its crucial applications span telecommunication, emergency services, and remote operations.

CSPIPT, signifying Communication Software for Intelligent Processing and Transmission, integrates machine learning algorithms to predict and optimize data flow. This feature enables adaptive bandwidth allocation and enhances user experience by prioritizing critical applications. CSPIPT is particularly useful in environments where every millisecond counts, such as financial trading platforms and real-time analytics systems.

Lastly, CSPINT, or Communication Systems Planning and Integration Technology, focuses on system interoperability and seamless integration. It simplifies the communication process between diverse systems, ensuring they cooperate efficiently and effectively. This technology is vital for organizations that rely on complex systems, as it boosts operational efficiency and reduces downtime.

Together, these advanced technologies offered by Desa Tech provide a comprehensive toolkit designed to meet the demands of today's fast-paced and interconnected world, emphasizing efficiency, security, and adaptability across multiple platforms and use cases.