TROUBLE SHOOTING GUIDE
PROBLEM | CAUSE | CORRECTION | |
|
|
| |
Motor will not | Pressure washer not plugged in. | Plug in pressure washer. | |
|
| ||
“RESET” button on GFCI not | Push “RESET” button. | ||
start and there | |||
is no humming | pushed. |
| |
sound | Circuit breaker has tripped or fuse | Reset breaker or replace fuse. | |
| is blown. |
| |
Power | Too much load already on circuit. | Reduce load on circuit. | |
source circuit |
| Try another 15 amp circuit. | |
continues to |
| ||
|
| ||
Using an extension cord. | DO NOT use extension cords. | ||
trip or blow | |||
fuses |
|
| |
|
|
| |
Motor hums but Using an extension cord. | DO NOT use extension cords. | ||
will not start |
|
| |
| Supply voltage below required | Check the voltage of the main | |
| minimum. | supply line. | |
|
|
|
No or low | Low water supply. |
pressure |
|
| High pressure hose is too long. |
Water supply must be at least 5 GPM @ 20 psi.
Use high pressure hose under 100 feet.
Worn nozzle. | Replace nozzle. |
Excess noise | Restricted, insufficient water | |
supply, or air in the water line. | ||
| ||
| Water temperature is too high. |
Check supply hose, faucet, and inlet screen.
Do not use water from a hot water source, use water only from a cold water faucet.
Pressure | Water leak in high pressure fittings, | |
fluctuates with- | ||
hose, or gun. | ||
out opening gun | ||
|
Replace hose or gun. If problem continues take to authorized service center.
GFCI switch indi- Circuit breaker has tripped or fuse | Reset breaker or replace fuse. If | |
cator light does | is blown. | indicator light still does not appear |
not appear after |
| have receptacle checked by a |
depressed |
| qualified electrician. |
|
|
|
GFCI test fails | Circuit breaker has tripped or fuse | Reset breaker or replace fuse. If |
| is blown. | indicator light still does not appear |
|
| have receptacle checked by a |
|
| qualified electrician. |
Unit does not | Nozzle clogged | Clean nozzle, if unit still does not |
maintain steady |
| maintain steady water pressure, |
water pressure |
| turn unit off and contact customer |
|
| service at |
Unit continues | Nozzle clogged | Clean nozzle, if unit still does not |
to trip GFCI |
| maintain steady water pressure, |
switch |
| turn unit off and contact customer |
|
| service at |
|
|
|
17- ENG | A17913 |