![CHANGING NOZZLES ON SPRAY WAND](/images/new-backgrounds/99018/9901823x1.webp)
Nozzle Color | Red | Yellow | Green | White | Black | ||||
|
|
| 0º | 15º | 25º | 40º | low pressure | ||
Spray |
|
|
|
|
|
| |||
Pattern |
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
| |
|
|
| powerful | intense cleaning | intense | covers wide | applies | ||
Uses | pinpoint for | ||||||||
cleaning of | areas of | cleaning | |||||||
|
|
| very intense | of small areas | larger areas | cleaning | solutions | ||
|
|
| cleaning |
| |||||
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
| |
|
|
| Metal or |
|
|
| metal, | ||
Surfaces * | concrete | metal, concrete, | metal, concrete, | metal, concrete, | |||||
concrete, | |||||||||
DO NOT use | |||||||||
|
|
| or wood | or wood | wood, or vinyl | wood, or vinyl | |||
|
|
| on wood |
|
|
| |||
|
|
|
|
|
|
| |||
* |
|
|
| The | high pressure | spray from | your pressure | washer is | |
|
|
| |||||||
|
|
| |||||||
|
|
|
| capable of causing damage to surfaces such as wood, | |||||
|
|
|
|
glass, automobile paint, auto striping and trim, and delicate objects such as flowers and shrubs. Before spraying, check the item to be cleaned to assure yourself that it is strong enough to resist damage from the force of the spray.
CHANGING NOZZLES ON SPRAY WAND
Risk of fluid injection. Do not
direct discharge stream toward persons, unprotected skin, eyes or any pets or animals. Serious injury will occur.
Flying objects could cause risk
of serious injury. DO NOT attempt to change nozzles while pressure washer is running. Turn engine off before changing nozzles.
1.Pull quick- connect coupler back and insert nozzle.
2.Release quick- connect coupler
and twist nozzle to make sure it is secure in coupler.
Flying object could cause risk
of serious injury. Ensure nozzle is completely inserted in quick- connect socket and
HOW TO APPLY CHEMICALS AND CLEANING SOLVENTS
Applying chemicals or cleaning solvents is a low pressure operation. NOTE: Use only soaps and chemicals designed for pressure washer use. Do not use bleach.
To Apply chemicals: |
|
1. Make sure the |
|
chemical hose |
|
is pressed |
|
onto the |
|
barbed fitting |
|
located near | Barbed |
high pressure | Fitting |
hose |
|
connection of pump as shown.
2.Place other end of chemical hose with filter on it into container holding chemical/cleaning solution. NOTE: For every 7 gallons of water pumped 1 gallon of chemical/cleaning solution will be used.
3.Select the soap nozzle on the gatling spray wand, see o Use Spray Wand paragraph in this section.
4.After use of chemicals, place chemical hose into container of clean water and draw clean water through chemical injection system
A16617 | 12- ENG |