English
• | Repairs attempted by |
| unqualified personnel can |
| result in serious injury or |
| death by electrocution. |
• | Electrical Grounding: |
| Failure to provide adequate |
| grounding to this product |
• | Any electrical wiring or repairs |
| required on this product |
| should be performed by a |
| DeWALT factory service |
| center or a DeWALT |
| authorized service center in |
| accordance with national and |
| local electrical codes. |
• | Make certain that the |
| electrical circuit to which the |
| compressor is connected |
•Always turn the compressor off and bleed pressure from the air hose and air tank before attempting maintenance, attaching tools or accessories.
WARNING: RISK OF Hot surfaces
What can happen | How to prevent it |
could result in serious injury |
or death from electrocution. |
See Grounding |
Instructions under |
Installation. |
provides proper electrical |
grounding, correct voltage and |
adequate fuse protection. |
•Touching exposed metal such as the compressor head, engine head, engine exhaust or outlet tubes, can result in serious burns.
• | Never touch any exposed |
| metal parts on compressor |
| during or immediately after |
| operation. Compressor will |
| remain hot for several minutes |
| after operation. |
• | Do not reach around |
| protective shrouds or attempt |
WARNING: Risk from Flying Objects
What can happen | How to prevent it |
maintenance until unit has |
been allowed to cool. |
•The compressed air stream can cause soft tissue damage to exposed skin and can propel dirt, chips, loose particles, and small objects at high speed, resulting in property damage or personal injury.
•Always wear certified safety equipment: ANSI Z87.1 eye protection (CAN/CSA Z94.3) with side shields when using the compressor.
•Never point any nozzle or sprayer toward any part of the body or at other people or animals.
6
