FIG. 1 |
|
|
English |
|
|
E | H | G |
|
| SPINDLE |
E |
|
|
| H | G |
|
| BLADE |
TO INSTALL THE BLADE (FIG. 1–4)
1.Place inner clamp washer (G) on saw spindle with the large flat surface facing out toward the blade.
2.Retract the lower blade guard (F) and place blade on saw spindle against the inner clamp washer, making sure that the blade will rotate in the proper direction (the direction of the rotation arrow on the saw blade and the teeth must point in the same direction as the direction of rotation arrow on the saw). Do not assume that the printing on the blade will always be facing you when properly installed. When retracting the lower blade guard to install the blade, check the condition and operation of the lower blade guard to assure that it is working properly. Make sure it moves freely and does not touch the blade or any other part, in all angles and depths of cut.
3.Place outer clamp washer (H) on saw spindle with the large flat surface against the blade and the wording on the outer clamp washer facing you.
4.Thread blade clamping screw (E) into saw spindle by hand (screw has
5.Depress the blade lock (I) while turning the saw spindle with the blade wrench until the blade lock engages and the blade stops rotating.
6.Tighten the blade clamping screw firmly with the blade wrench. NOTE: Never engage the blade lock while saw is running, or engage in an effort to stop the tool. Never turn the saw on while the blade lock is engaged. Serious damage to your saw will result.
TO REPLACE THE BLADE
1.To loosen the blade clamping screw (E), depress the blade lock
(I) and turn the saw spindle with the blade wrench until the blade lock engages and the blade stops rotating. With the blade lock engaged, turn the blade clamping screw counterclockwise with
6
