Manuals / DeWalt / Power Tools / Grinder

DeWalt DWE4557 instruction manual Safety Warnings Specific for Sanding Operations

Models: DWE4557

1 72
Download 72 pages 54.07 Kb
Page 56
Image 56

English

b)Do not position your body in line with and behind the rotating wheel. When the wheel, at the point of operation, is moving away from your body, the possible kickback may propel the spinning wheel and the power tool directly at you.

c)When wheel is binding or when interrupting a cut for any reason, switch off the power tool and hold the power tool motionless until the wheel comes to a complete stop. Never attempt to remove the cut-off wheel from the cut while the wheel is in motion otherwise kickback may occur. Investigate and take corrective action to eliminate the cause of wheel binding.

d)Do not restart the cutting operation in the workpiece. Let the wheel reach full speed and carefully reenter the cut. The wheel may bind, walk up or kickback if the power tool is restarted in the workpiece.

e)Support panels or any oversized workpiece to minimize the risk of wheel pinching and kickback. Large workpieces tend to sag under their own weight. Supports must be placed under the workpiece near the line of cut and near the edge of the workpiece on both sides of the wheel.

f)Use extra caution when making a “pocket cut" into existing walls or other blind areas. The protruding wheel may cut gas or water pipes, electrical wiring or objects that can cause kickback.

Safety Warnings Specific for Sanding Operations

a)Do not use excessively oversized sanding disc paper. Follow manufacturers recommendations, when selecting sanding paper. Larger sanding paper extending beyond the sanding pad presents a laceration hazard and may cause snagging, tearing of the disc or kickback.

Safety Warnings Specific for Polishing Operations

a)Do not allow any loose portion of the polishing bonnet or its attachment strings to spin freely. Tuck away or trim any loose attachment strings. Loose and spinning attachment strings can entangle your fingers or snag on the workpiece.

Safety Warnings Specific

for Wire Brushing Operations

a)Be aware that wire bristles are thrown by the brush even during ordinary operation. Do not overstress the wires by applying excessive load to the brush. The wire bristles can easily penetrate light clothing and/or skin.

b)If the use of a guard is recommended for wire brushing, do not allow any interference of the wire wheel or brush with the guard. Wire wheel or brush may expand in diameter due to work and centrifugal forces.

Additional Safety Warnings for Grinders

WARNING: The grinding wheel or accessory may loosen during coast-down of the tool when shut off. If grinding wheel or accessory loosens, it may dismount from the machine and may cause serious personal injury.

•Use of accessories not specified in this manual is not recommended and may be hazardous. Use of power boosters that would cause the tool to be driven at speeds greater than its rated speed constitutes misuse.

•Use clamps or another practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body leaves it unstable and may lead to loss of control.

56

Page 55 Page 57
Page 56
Image 56
DeWalt DWE4557 Safety Warnings Specific for Sanding Operations, Safety Warnings Specific for Polishing Operations
Page 55 Page 57

DWE4557 specifications

The DeWalt DWE4557 is a powerful and robust angle grinder designed to deliver high performance and durability for both professional and DIY enthusiasts. This tool is equipped with a 4.5-inch diameter wheel and is renowned for its efficient performance in heavy-duty applications. One of its key features includes a 13-amp motor that provides a remarkable power output of 2,000 watts, ensuring that it can handle tough materials such as metal and masonry with ease.

One of the standout technologies in the DWE4557 is its electronic kickback brake, which engages in the event of a wheel bind-up. This feature helps to minimize the risk of injury and maximizes user safety by bringing the wheel to a stop quickly. The grinder also boasts a no-volt release switch that prevents the tool from starting unexpectedly when reconnected to a power source—a vital safety consideration for frequent users.

The DWE4557 is designed with user comfort in mind. It has an anti-vibration handle that significantly reduces the amount of vibration felt during operation, allowing for prolonged use without causing discomfort to the user’s hands and arms. The handle can be adjusted for optimal control and comfort, accommodating different user preferences.

Additionally, the angle grinder has an integrated safety guard that can be easily adjusted for convenience and operational versatility. The guard protects the user from debris and sparks while grinding or cutting, thereby enhancing safety during use. The DWE4557 also features a spindle lock for easy wheel changes, making it quick and straightforward to switch between different attachments based on the job at hand.

It is worth noting that the DeWalt DWE4557 is designed for durability. It includes a robust, durable construction that can withstand the rigors of heavy usage, ensuring a long lifespan of the tool. The gear case is also designed for longevity, with a high-performance drive system that ensures consistent and reliable operation.

Overall, the DeWalt DWE4557 is a reliable angle grinder that combines power, performance, and safety features in a compact and durable design. Whether for professional applications or personal projects, this tool is well-equipped to deliver outstanding results in a variety of grinding and cutting tasks.