WARNING: RISK OF CUT OR BURNS
WHAT CAN HAPPEN | HOW TO PREVENT IT |
WARNING: AIR SUPPLY AND CONNECTIONS
• | Do not use oxygen, combustible gases, or bottled gases |
| as a power source for this tool as the tool may explode, |
| possibly causing injury. |
• | Do not use supply sources which can potentially exceed |
English
•Tools which cut, shear, drill, punch, chisel, etc., are capable of causing serious injury.
•Keep the working part of the tool away from hands and body.
200 PSI (13.8 bar) as tool may burst, possibly causing injury. |
• The connector on the tool must not hold pressure |
when air supply is disconnected. If a wrong fitting is used, |
the tool can remain charged with air after disconnecting |
and thus will be able to after the air line is disconnected |
possibly causing injury. |
• Always disconnect air supply: |
WARNING: RISK OF ENTANGLEMENT
WHAT CAN HAPPEN | HOW TO PREVENT IT |
1) | Before making adjustments; |
2) | When servicing the tool; |
•Tools which contain moving elements, or drive other moving tools such as grinding wheels, sockets, sanding discs,etc., can become entangled in hair, clothing, jewelry and other loose objects, resulting
in severe injury.
•Never wear loose fitting clothes, or apparel which contains loose straps or ties, etc., which could become entangled in moving parts of the tool.
•Remove any jewelry, watches, identifications, bracelets, necklaces, etc., which might become caught by the tool.
•Keep hands away from moving parts. Tie up or cover long hair.
•Always wear proper fitting clothing and other safety equipment when
using this tool.
3) | When tool is not in use; |
4) | When moving to a different work area, as accidental |
| actuation may occur, possibly causing injury. |
SAVE THESE INSTRUCTIONS FOR FUTURE USE
8
