*Always be sure aft components are mounted properly and securely before using tool.

*Always handle the saw blade with care when mounting or removing # or when removing the diamond knockout.

*Always wait until the motor has reached furl speed before starting a cut.

*Always keep handles dry, clean and free of oil and grease. Hold the tool firmly with both hands when in use.

Always be alert at all times, especially during repetitive,

monotonous operations. Always be sure of position of your hands relative to the blade.

Stay clear of end pieces that may fall after cutting off. They may be hot, sharp and/or heavy, Serious personal injury may result.

Replace or repair damaged cords. Make sure your extension cord is in good condition. Use only 3-wire extension cords that have 3-prong grounding-type plugs and 3-pole receptacles that accept the tool's plug.

*An extension cord must have adequate wire size (AWG or American Wire Gauge) for safety. The smaller the gauge number of the wire, the greater the capacity of the cable, that is 16 gauge has more capacity than 18 gauge. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. When using more than one extension to make up the total length, be sure each individual extension contains at least the minimum wire size. The following table shows the correct size to use depending on cord length and nameplate ampere rating. If in doubt, use the next heavier gauge. The smaller the gauge number, the heavier the cord.

 

 

Minimum Gauge for Cord Sets

 

 

 

 

Volts

 

Total Length of Cord in Feet {meters)

Ampere

Rating

120V

25 (7.6)

50 (15.2)

1100

(30.5)_150

(45.7)

 

 

 

 

240V

50

(15.2)

100 (30.5)

200

(61.0)300

(91.4)

More

Not More

 

 

 

AWG

 

 

 

Than

Than

 

 

 

 

 

 

 

0

6

 

 

18

16

 

16

14

6

10

 

 

18

16

 

14

12

10

12

 

 

16

16

 

14

12

12

16

 

 

14

12

Not Recommended

_,CAUTION: Blades coast after turn off. Serious personal injury may result.

WARNING: ALWAYS wear proper personal hearing protection that conforms to ANSI $12.6 ($3.19) during use. Under some conditions and duration of use, noise from this product may contribute to hearing loss.

A WARNING: ALWAYS use eye protection. All users and bystanders must wear eye protection that conforms to ANSI

787.1.

AWARNING: ALWAYS USE SAFETY GLASSES. Everyday eyeglasses are NOT safety glasses. Also use face or dust mask ff cutting operation is dusty, ALWAYS wear certified safety equipment:

*ANSI Z87.1 eye protection (CAN/CSA Z94.3).

*ANSI S12.6 (S3.19) hearing protection.

*NIOSH/OSHA respiratory protection.

AWARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known in the state of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

* lead from lead-based paints,

Page 6 Page 8
Page 7
Image 7
DeWalt DWS535T instruction manual Minimum Gauge for Cord Sets
Page 6 Page 8

DWS535T, DWS535 specifications

The DeWalt DWS535 is a powerful and versatile circular saw that is designed to meet the rigorous demands of professionals and DIY enthusiasts alike. Known for its solid construction and cutting-edge technology, the DWS535 showcases the brand's commitment to quality and innovation in woodworking tools.

One of the standout features of the DWS535 is its robust 15-amp motor, which delivers a remarkable no-load speed of 5,300 RPM. This ensures users can tackle a variety of cutting tasks with ease and confidence, whether working with lumber, engineered wood products, or other materials. The high-speed blade cuts through even the toughest materials quickly and efficiently, making it ideal for framing, decking, and general carpentry projects.

The DWS535 is equipped with a 7-1/4 inch carbide-tipped blade that enhances cutting accuracy and durability. The blade's design allows for smooth and clean cuts, reducing the need for post-processing. Additionally, the saw’s integrated electric brake stops the blade quickly after the trigger is released. This safety feature not only enhances user control but also minimizes the risk of accidental injuries, making it a safer choice for operators.

Comfort and usability are also central to the design of the DWS535. It features a lightweight, well-balanced construction that allows for easy maneuverability. Furthermore, the ergonomic handle is designed to reduce fatigue during extended use, providing better grip and control. The saw’s bevel capacity of 0° to 45° contributes to its versatility, enabling users to achieve angled cuts with precision.

Incorporating advanced technologies, the DWS535 features a built-in rafter hook that provides convenient storage and accessibility. Additionally, the saw is designed with a durable protective blade guard that enhances safety while allowing users to easily visualize their cutting line. The tool’s dust port is another thoughtful addition, helping to keep the workspace clean and free from debris, ultimately improving visibility for better accuracy.

Overall, the DeWalt DWS535 stands out in a crowded market of circular saws with its powerful performance, safety features, and user-friendly design. Whether you’re a seasoned professional or a weekend warrior, this tool is engineered to deliver efficiency, accuracy, and safety on every job site. With its remarkable combination of features, the DWS535 proves to be a wise investment for anyone serious about woodworking or construction.
Top Page Image Contents