DeWalt DPD3000IC Specifications, Definitions Safety Guidelines, Important Safety Instructions

Specifications

MODEL	WEIGHT	HEIGHT	WIDTH	Length	PSI Max*	AVERAGE	GPM Max*	AVERAGE	Engine
						Operating		Operating
						PSI		GPM
DPD3000IC	83.6 lbs	26.5"	23"	40"	3000	2750	2.8	2.7	DeWALT
					(20384 kPa)	(18961 kPa)	(10.6 L/min)	(10.3 L/min)	196 cc OHV,

5.5 Net HP, 6.5

Gross HP **

*Maximum PSI and GPM ratings determined in accordance with the Pressure Washers Manufacturers Association (PWMA) standard PW101

**Horsepower rating (shown as maximum output @ 3600 rpm) is in accordance with SAE J1349 for Net HP and SAE J1995 for Gross HP. Actual engine power will be lower. Engine power depends on the application, operating speed, operating conditions and other variables.

English

Definitions: Safety Guidelines

The definitions below describe the level of severity for each signal word. Please read the manual and pay attention to these symbols.

DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

CAUTION: Used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result in property damage.

IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR ANY DeWALT TOOL, CALL US TOLL FREE AT:

1-800-4-DeWALT (1-800-433-9258)

Important Safety Instructions

WARNING: Do not operate this unit until you read and understand this instruction manual and the engine instruction manual for safety, operation and maintenance instructions.

Warning: When using this product basic precautions should always be followed, including the following:

1.Read all instructions before using the product.

2.To reduce the risk of injury, close supervision is necessary when a product is used near children.

3.Know how to stop the product and bleed pressures quickly. Be thoroughly familiar with the controls.

4.Stay alert–watch what you are doing.

5.Do not operate the product when fatigued or under the influence of alcohol or drugs.

6.Keep operating area clear of all persons.

3