DeWalt N0003431, DPD3000IC instruction manual What can happen How to prevent it, Operators

English

7.Do not overreach or stand on unstable support. Keep good footing and balance at all times.

8.Follow the maintenance instructions specified in the manual.

Danger: Risk of Injection or Severe Injury. Keep Clear of Nozzle. Do Not Direct Discharge Stream at Persons. This Product Is To Be Used Only By Trained

DANGER: Risk of explosion or fire

What can happen How to prevent it

Operators.

WARNING: This product may not be equipped with a spark- arresting muffler. If the product is not equipped and will be used around flamma­ble­ materi­als­ or on land covered with materials such as agricultural crops, forest, brush, grass or other similar items, then an approved­ spark arrester must be installed and is legally required in the state of California. It is a violation of California statutes section 130050 and/or sections­ 4442 and 4443 of the California Public Resourc­es­ Code, unless the engine is equipped with a spark

•Spilled gaso­line­ and it’s vapors can become­ ignited from cigarette sparks, electrical arcing, exhaust gases­ and hot engine components such as

the muffler.

•Shut off engine­ and allow it to cool before adding fuel to the tank.

•Use care in filling­ tank to avoid spilling­ fuel. Move pres- sure washer­ away

from fueling area before starting­ engine­.

arrester, as defined in section 4442, and maintained in effec­tive­ working­ order. Spark arresters are also required on some U.S. Forest­ Service land and may also be legally required under other statutes and ordi­nanc­es­.

WARNING: This product and its exhaust contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. In addition, some cleaning products and dust contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.

Save these instructions

•Heat will expand­ fuel in the tank which could result in spillage and possi­ble­ fire explosion.

•Operating the pressure washer in an explo­sive­ environ­ment­ could result­ in a fire.

•Materials placed against or near the pressure washer can inter­fere­ with its proper ventilation features­ causing­ overheating and possible igni­tion­ of the materials.

•Keep maximum fuel level

1/2" (12.7 mm) below­ bottom of filler neck to allow for expansion.

•Operate and fuel equipment in well-venti­lat­ed­ areas free from obstruc­tions­. Equip areas with fire extinguisher suitable­ for gaso­line­ fires.

•Never oper­ate­ pressure washer­ in an area containing dry brush or weeds.

4