Version 1.8.0 - 16.06.2008
25
Configuration and Operation of an 52/XR MADI Router
Änderungen vorbehalten / Subject to change without notice.
7.1.6 Synchronisation
Selecting the Audio branch, displays the synchronisation window. Here you can do refinements on the current device
synchronisation.
It is possible, to configure two independent synchronisation sources. Sync Source 1 is always meant to be the master
sync source and is used by the system as long as it is available. If it fails and a secondary sync source is configured and
available, the system automatically switches over to Sync Source 2. If this source is not available, too, or not
configured, the system switches to Internal Synchronisation.
Currently, the Toolbox5 supports synchronisation frequencies of 48 kHz and 44.1 kHz. In a future version, also 96 kHz and
88.2 kHz will be supported. The hardware is already able to handle both higher frequencies.
Switch on the VariSpeed option, if you want to synchronise the router to an external synchronisation frequency with a
larger jitter. This option activates a VariPLL, which could handle such sources.
You can choose the synchronisation source out of a list of 9 possible sources:
·Internal
·BNC 1 Word Clock
·BNC 2 Word Clock
·MADI 3.1
·MADI 13.1
·RJ45 AES3/EBU
·BNC 1 AES3/EBU
·BNC 2 AES3/EBU
·BNC 1 Video
The synchronisation tab can be seen by selecting the Audio branch.