7 CONFIGURATION COMMAND Reference

Bit 2 is set to 1 to cause a signaling link test (in accordance with ITU-T Q.707

/ANSI T1.111.7) to be carried out every 30 seconds. Note that this bit is ignored unless bit 1 is also set to 1.

Bit 8 is used to select the MTP2 error correction mode. It is set to 1 to select PCR (Preventive Cyclic Retransmission) operation or zero for the Basic Method of Error Correction.

Bit 11 is set to 1 to select 56kbit/s operation for the link or zero for 64kbit/s operation.

Note: When using a serial port, 56kbit/s operation is only supported when the clock is applied externally.

Bit 13 is only used when the link has been configured to run over a serial port. If set to 1 an external clock is used (Receive clock). If set to zero an internal clock (Transmit clock) is used. If the link has not been configured to run over a serial port, this bit must be set to zero.

Bit 14 is set to 1 to use a serial port rather than a PCM timeslot for this link. In this mode the stream and timeslot parameters for this link are ignored (and must be set to zero). If this bit is set to zero, the link uses the specified stream and timeslot. The serial port used by the signaling processors for each link is fixed, according to the following table:

Blink

Serial Port

0

B

 

 

1

A

 

 

2

Cannot be used for a serial port.

 

 

3

Cannot be used for a serial port.

 

 

Bit 15 is set to 1 to disable the link or zero to enable the link.

All other bits are reserved for future use and must be set to zero.

7.2.4MTP Route

Syntax:

MTP_ROUTE <dpc> <norm_ls> <user_part_mask>

 

<flags> <second_ls>

Example:

MTP_ROUTE 567 0 0x0020 0x0000 0

Configuration of a route for use with one or more user parts.

<dpc>

The point code of the remote signaling point for which this command is configuring routing data. It may be either an adjacent point code or a point code accessible via an adjacent Signaling Transfer Point.

<norm_ls>

The linkset_id of the normal link set used to reach the specified destination. The norm_ls must be a linkset_id that has already been configured using the MTP_LINKSET command. The normal link set may be any of the following:

100

Page 99 Page 101
Page 100
Image 100
Dialogic DSI SPCI Network Interface Boards manual MTP Route, Dpc, Normls, Blink Serial Port
Page 99 Page 101

DSI SPCI Network Interface Boards specifications

Dialogic DSI SPCI Network Interface Boards are highly advanced and versatile communication solutions tailored for the demands of modern telephony and multimedia applications. These boards are designed to efficiently process voice, data, and signaling, making them an essential component for businesses looking to enhance their communication capabilities.

One of the standout features of the Dialogic DSI SPCI boards is their ability to handle multiple telephony protocols. This flexibility allows users to connect to various network types, whether PSTN, VoIP, or legacy systems, ensuring seamless interoperability. The boards support industry-standard protocols such as ISDN, SS7, and SIP, enabling integrated communication across diverse platforms.

The technology behind the Dialogic DSI SPCI boards incorporates state-of-the-art digital signal processing (DSP). This powerful DSP architecture provides efficient encoding and decoding of voice and video signals, leading to enhanced call quality and reduced latency. Moreover, the DSP technology supports advanced codecs, ensuring that voice communication is clear and intelligible, even over bandwidth-limited connections.

Another significant characteristic of these boards is their scalability. Organizations can start with a single board and expand their telecommunication capabilities as their needs grow. This scalability makes them suitable for a wide range of applications, from small businesses to large enterprises, allowing for easy integration into existing infrastructures.

In addition to their powerful processing capabilities, Dialogic DSI SPCI boards also prioritize reliability and robustness. They are designed with a focus on fault tolerance, ensuring that telephony services remain uninterrupted even in the event of hardware failure. This resilience is critical for mission-critical applications where downtime can lead to significant revenue loss.

Furthermore, the boards feature extensive application development support. Developers can leverage the Dialogic API and various development kits to create custom telephony applications that meet specific business requirements. This programmability opens the door to innovative solutions, such as interactive voice response (IVR) systems, automated call distribution (ACD), and customer relationship management (CRM) integration.

In summary, Dialogic DSI SPCI Network Interface Boards are a cornerstone for organizations looking to innovate their telecommunication systems. With their support for multiple protocols, advanced DSP technology, scalability, reliability, and development support, these boards empower businesses to optimize their communication strategies and adapt to the evolving landscape of digital interaction.
Top Page Image Contents