4. PBX Systems
Example
An application uses the d42_gtcallid( ) function to retrieve the calling number
ID for a call received on a specified channel on a Dialogic® PBX Integration
Board. The calling number ID data and corresponding ASCII values are
shown below.
text bb 2 2 1 _ 2 2 4
data 20 32 32 31 5F 32 32 34 xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
byte 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
text
data xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
byte 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47
4.5.7. Setting the Message Waiting Indicator
The Dialogic® PBX Integration Board can set the Message Waiting display
(on or off) on another extension using the dx_dial( ) function and the
appropriate dial string. Refer to the Dialogic® PBX Integration Software
Reference for more information about dialing programmable keys.
MWI On
A technique to turn on the MWI in this switch, using dx_dial( ) with the dial
string, is to:
1. Go off-hook using the dx_sethook( ) function.
2. Call the dx_dial( ) function. The dial string is
<ESCO><extension><ESCO> (optional pause character may be used).
3. Go on-hook using the dx_sethook() function again.
NOTE: <ESCO> means the Escape character followed by O.
129