Dialogic M7324 - page 84

Dialogic® PBX Integration Board User’s Guide

4. Exit Programming Mode.

For more information, see the Mitel Superswitch manuals.

Phone-Side Programming

SX-200 and SX2000 PBXs and Mitel Superset 430 Emulation:

Personal Key 10 should store the MWI OFF feature access code and Personal

Key 11 should store the MWI ON feature access code (see Figure 9).

1. Connect the extension (that will be connected to the Dialogic® PBX

Integration Board) to a Mitel Superset 430 phone. Repeat the steps for all

extensions that would be connected to the board.

2. On a Superset 430 phone, press the SuperKey.

For SX-200 PBXs and a SuperSet 430 phone:

a) Press the More soft-key.

b) Press Feature Key soft-key.

c) Press the desired personal key (either 10 or 11).

d) Press Change soft-key.

e) Press Speed Call soft-key.

f) Enter the MWI Feature Access code (for key 10 – MWI OFF, for 11-

MWI ON).

g) Press the Save soft-key.

h) Press the Superkey.