Diamond Multimedia DV170J/JB manual Connecting the Display to your Computer Using the VGA cable

Connecting the Display to your Computer

Using the VGA cable

1.	Power off your computer.
2.	Connect one end of the VGA signal cable to the LCD
	Monitor’s VGA port. (See Fig 1-3)

3.Connect the other end of the signal cable to the VGA port on your PC.

4.Make sure connections are secure.

Connecting the AC Power

1.Connect the power cord to the monitor. (See Fig. 1-4)

2.Connect the power cord to an AC power source.

Instructions for VESA Mounting

To detach the LCD Monitor from its stand, unscrew the two screws n for the monitor stand and pull it downwards to remove, then unscrew the four screws o for the monitor stand bracket and pull this down to remove.

Figure 1-3

Figure 1-4

Interface for Arm Applications

Before installing the mounting device, please refer to Fig.1-7.

The rear of this LCD display has four integrated 4 mm, 0.7 pitch threaded nuts, as well as four 5mm access holes in the plastic covering as illustrated in Figure 1-2. (These specifications meet the VESA Flat Panel Monitor Physical Mounting Interface Standard).

6

Figure 1-6

Figure 1-7