![](/images/new-backgrounds/1314381/3143819x1.webp)
DPLS1 Drain Panel Level Sensor/Control Protected under one or more patents
© 2011 Mitsubishi Electric & Electronics USA, Inc.
BATTERY INSTALLATION on the DPLS1:
1.Remove the #2 screw from the top of the DPLS1 control box (fig 11).
Fig 11
2.Separate the top from the base of the control box. Remove the 1/2 AA Lithium battery and replace with a new battery of identical type, making sure that battery polarity is correct (fig 12).
Fig 12
3.Reassemble DPLS1 top to base with screw
LIMITED WARRANTY
Diamondback DPLS1 Drain Pan Level Sensor/Control
1.ONE YEAR DRAIN PAN LEVEL SENSOR/CONTROL WARRANTY - MITSUBISHI ELECTRIC & ELECTRONICS USA, INC. (“MEUS”) warrants to the original
2.THIS WARRANTY DOES NOT INCLUDE LABOR or other costs incurred for servicing, repairing, removing, installing, shipping or handling of defective or replacement Drain Pan Level Sensor/Control.
3.TO OBTAIN WARRANTY SERVICE, please contact your dealer or contractor who installed this product. If your dealer or contractor needs assistance, its distributor is available for consultation. Should you not receive satisfactory warranty service, please call, fax or write to us at:
warranty@hvac.mea.com
Mitsubishi Electric & Electronics USA, Inc.
Attn.: Customer Service,
3400 Lawrenceville Suwanee Road
Suwanee, Georgia 30024
Phone:
4.This limited warranty applies only while the Drain Pan Level Sensor/Control remains at the site of the original installation. This limited warranty applies only if the Drain Pan Level Sensor/Control is installed and operated in accordance with the manufacturer’s instructions and in compliance with applicable local installation and building codes and good trade practices.
5