Digi MIL-5008H manual About This Guide, Packag e Contents

Install Guide

Introduction

This guide describes the installation of the MIL-5008H hub and its integration into a network. It covers unpacking the product, connection of power, cabling requirements and connection to the RJ-45 ports, and installing the optional feet and rack mount ears. In addition, this guide describes the meaning of the LEDs, provides trouble shooting suggestions, and a theory of operation of the MIL- 5008H.

The MIL-5008H complies with the IEEE 802.3u standard for 100BASE-TX class II hubs supporting half duplex, 100Mbps bandwidth. Each port supports auto partitioning with reconnection after fault correction.

The LEDs easily update the user on the status of the hub. This includes collision and power status, link integrity, data reception, and port partitioning.

About This Guide

This guide describes the installation of the Digi MIL-5008H Fast Ethernet 100BASE-TX hub. The guide covers the following topics:

•Description of hardware and features

•Theory of Operation

•Hardware installation procedures

•Warranty and Technical Support

Packag e Contents

Carefully unpack the contents of the package and check them against the following list:

•MIL-5008H Hub

•Power Supply

•Four rubber feet and rack mount ears

•Warranty registration card

Contact your dealer if any of the above is missing or damaged. Retain the original shipping carton and material in the event the unit needs to be returned or repaired.

Remember to read the enclosed warranty and return the registration card within 10 days of purchase to validate the warranty. This also entitles you to technical support.

Model: MIL-5008H Fast Ethernet TX Hub 3