Digi NS9750 Figure 42: External memory 2 wait state read timing diagram, Table 50: External memory 0 wait state read, Table 51: Static memory timing parameters

Static memory controller
126 NS9750 Hardware Reference
Figure 42 shows an external memory read transfer with two wait states (WAIT RD= 2).
Seven AHB cycles are required for the transfer, five for the standard read access and
an additional two because of the programmed wait states added (WAIT RD). Table 51
provides the timing parameters. Table52 describes the transactions in Figure 42.
Figure 42: External memory 2 wait state read timing diagram
Cycle Description
T0 AHB address provided to memory controller.
T0-T1 AHB transaction processing.
T1-T4 Arbitration of AHB memory ports.
T4-T5 Static memory address, chip select, and control signals submitted to
static memory.
T5-T6 Read data returned from the static memory. Data is provided to AHB.
Table 50: External memory 0 wait state read
Timing parameter Value
WAITRD 2
WAITOEN 0
WAITPAGE N/A
WAITWR N/A
WAITEN N/A
WAITTURN N/A
Table 51: Static memory timing parameters
STCSOUT_n
COEOUT_n
clk_out
ADDR
DATAIN
A
D(A)
T0 T1 T2 T3 T4 T5 T6 T7 T8