Taking pictures
Switch on your epsilon camera by holding down the power button for a second.
Turn the Mode selection switch to the 
Automatic or 
Manual setting for picture taking. You can either use the viewfinder or display screen to focus on the picture you want to take. When you are ready press down the shutter button hard and release.
The image will now be processed, when the display appears again you can take the next shot.
Note: If you have used the flash the camera will take a short while longer to recharge the flash.
Shutter button
Power Switch
Mode selection set to “Auto”
Macro Mode
Macro switch
Slide up
If you want to take photo’s of close up ob- jects slide the Macro switch upwards. This will focus in on close objects, if this is not enabled anything closer than one meter will appear blurred.
8
