before the rest of your pedal effects so you don’t have to bypass other effects on your pedal board just to tune.
To connect the Tuner to your amp, do the following:
1.If you are not using battery power, connect an optional PS200R to the HardWire Tuner’s power input.
2.Connect a cable from your instrument’s 1/4" jack to the 1/4” Input.
3.Connect the Tuner’s THRU output to the input of your amplifier to hear your guitar while tuning. Connect the Tuner’s MUTE output to the input of your guitar amplifier if you do not want to hear your guitar while tun- ing.
Note: Use unbalanced mono instrument cables only.
