Tuning Your Instrument
(Strobe Mode)
To tune your guitar or bass, do the following:
1.Press the Foot Switch to turn the tuner on. A dash appears in the note display until a note is played.
2.Play a note with your instrument. The note being played dis- plays in the Note Display. If it is a sharp note, a decimal point lights in the lower right of the Note Display (i.e. d. = D#).
3.Tune your instrument based on the indication of the LED array. If LEDs move to the left, the note is flat and needs to be tuned up. If LEDs move to the right, the note is sharp and needs to be tuned down. As the string gets closer to being in tune, the LED movement slows. When the note is in tune the LED array turns off leaving only the center blue LED lit.
4.Continue to tune the rest of your strings in the same manner.
5. When tuning is complete, press the Foot Switch to bypass it. | 11 |
