Dimension One Spas Diplomat Doc-1212Rev - B Rev Date 1/31/05, Page 2 of, Top View of Spa

2005 Diplomat Specifications Dimension One Spas

	2005 Diplomat
Architectural Specification			R16 in [R41 cm]Shell
19 in [48 cm]	18 1/2 in [47 cm]		R16 in [R40 cm]
	12 in [31 cm]	16 in [41 cm]
SIS Compartment	Top View of Spa		91 1/2 in [232 cm]
			Shell
	16 in [41 cm]		See Caution
			91 in [231 cm]
			Skirt
	THIS 3 FOOT SQUARE AREA,		89 in [225 cm]
	ON BOTTOM OF SPA, TO BE
	SUPPORTED CONSISTENT WITH		Pedestal
	THE EDGES OF SPA BASE.		Base

27 in [67 cm]	See Note 5	Equipment Compartment
Recommended location
Electrical
Inlet
11 in [28 cm]
Hose Bib/
Water Drain
	Vent	Vent 23 1/2 in [60 cm]
	Vent	34 1/2 in [88 cm]
		56 1/2 in [143 cm]
	67 1/2 in [171 cm]
	Control	91 1/2 in [232 cm]
		Spa Lip
		Front View of Spa

Hose Bib/

Water

Drain

3 1/2 in [9 cm]

Pedestal Base

Door Extends

Under Spa Lip 75 in [191 cm]

89 in [225 cm]

91 in [231 cm]

35 1/2 in [90 cm]

32 in [81 cm]

16 in [41 cm]

Note: 1. Subject to change without notice.

2.Engineering specs may differ slightly from brochure.

3.For E-Z lifter installation allow 18” (45.7cm) clearances on the backside of the spa.

4.Alternative cabinets may add significant weight. Ask your dealer for exact details

5.This is the approximate location for drilling a hole if you must bring the power line in through the bottom of the spa. Be careful not to puncture a plumbing line inside the equipment compartment(drill from the inside compartment out).

Caution:

Due to manufacturing tolerances there could be some

minor differences between the actual spa and the drawing above.

If site planning is critical to such tolerances, be sure to measure your actual spa.

Doc-1212 Rev - B Rev Date: 1/31/05 Specification, 2005, Diplomat Page 2 of 2