Replacing 13amp fuse
The 13amp fuse must be ASTA approved to BS1362. The fuse may be replaced by pulling out the fuse holder, marked ‘fuse’, on the remote switch assembly until the fuse is dislodged. The new fuse should then be located and held in position while the fuse holder is pushed back into position.
Circuit Diagram
After Sales Service
Your Dimplex base unit fan heater is guaranteed for two years from date of purchase. We undertake to exchange or repair free of charge within this period any part found to be defective due to a manufacturing fault. This guarantee in no way prejudices your rights under common law.
Should you require after sales service, please get in touch with the supplier through whom you purchased the appliance, or your nearest service agent.
Please do not initially return a faulty appliance or part of an appliance to us as this may result in transit damage and / or delay in providing service. Let us know your difficulty, quoting the model number and series letter of the appliance. We will then take the appropriate action.
This product complies with the European Safety Standard
Glen Dimplex UK Limited | UK customer help line (8.00AM – 6.00PM | |
Millbrook House |
|
|
Grange Drive | Customer Services: Tel. | 0870 7270101 |
Hedge End | Fax. | 0870 7270102 |
Southampton |
|
|
Hampshire SO30 2DF | Republic of Ireland | 01 8424833 |
[c] Glen Dimplex UK Limited
All rights reserved. Material contained in this publication may not be reproduced in whole or in part, without prior permission in writing of Glen Dimplex UK Limited.
