Fireplace Installation
Construction and electrical outlet wiring must comply with local building codes and other applica- ble regulations to reduce the risk of fire, electric shock and injury to persons.Do not attempt to wire your own new outlets or circuits. To reduce the risk of fire, electric shock or injury to persons, always use a licensed electrician
Make sure the units MAIN ON/ OFF switch is switched OFF (refer to operating instruction sec- tion).
Plug the unit into a 15 Amp/120 VAC outlet. If the cord does not reach, you may use a No. 14 AWG minimum size extension cord rated for a minimum of 1875 Watts.
Mantel Installation
For use with a new or existing mantel, insert fireplace as shown in Figure 7 and anchor in place with supplied screws.
| Figure 7 |
| x6 |
10 | www.dimplex.com |
