Operation
the hand held transmitter (Figure 9).
2.Correctly install one 12 Volt (A23) battery in the battery holder.
3.Close the battery cover.
Maintenance
WARNING: Disconnect power before attempting any maintenance or cleaning to reduce the risk of fire, electric shock or damage to persons.
Light Bulb Replacement
Allow at least 5 minutes for light bulbs to cool off before touching bulbs to avoid accidental burning of skin.
Light bulbs need to be replaced when you notice a dark section of the flame or when the clarity and detail of the log exterior disappears. There are two (2) bulbs under the log set which generate the flames and embers.
Helpful Hints
It is a good idea to replace all light bulbs at one time if they are close to the end of their rated life. Group replacement will reduce the number of times you need
to open the unit to replace light bulbs.
Bulb Requirements
Quantity of 2 clear chandelier or candelabra bulbs with an
To Replace The Light Bulbs
1.Unplug the unit from power outlet.
2.On the back of the Compact Fireplace remove the screws from the light access cover (Figure 11)
3.Remove the light access cover.
4.Reach into the opening, locate and examine the bulbs to determine which bulb(s) require replacement.
5.Unscrew the bulb(s) counter clockwise.
13
