Operation
Remote Control
The remote control has a range of approximately 50 feet (15.25 m). It does not have to be pointed at the fireplace and can pass through most obstacles (including walls). It is supplied with 243 independent frequencies to prevent interference with other units.
Battery Installation (Figure 4)
control it is recommended to replace the batteries promptly, to maintain full functionality of the remote/fireplace. The remote transmitter has a battery backup time of only several hours.
Initializing/ Reprogram- ming the Remote Control
1. | Plug cord into 120 Volt wall |
| outlet. |
2. | Ensure the Main On/Off Switch |
Figure 4 |
Child Lock Batteries |
1.Depress the tab on the battery cover on the back of the remote transmitter and remove battery cover.
| of the fireplace (Figure 3A) is | |
| in the On | position. |
3. | Set the 3 Position Manual | |
| Control (Figure 3B) to the | |
| Remote position (left position). | |
4. | Press and hold the | |
| Initialization Button on the unit | |
| (Figure 3C). |
|
5. | While holding the Initialization | |
| Button, press the Flame/ | |
| Heat On/Off | button or the |
| Purifire™ On/Off button on | |
| the remote control transmitter | |
2.Install two (2) AAA batteries into the remote control
(included).
3.Ensure child lock is in the 
position.
4.Replace the battery cover.
!NOTE: When the “BAT” symbol is present on the remote
| (Figure 5). |
6. | Release the Initialization |
| Button on the unit. |
7. | Press the Flame/Heat On/Off |
| button to turn the Flame/ |
| Heat function on or press the |
| Purifire™ On/Off button to |
| turn the Purifire™ function on. |
11
