Maintenance
4.Slide glass to the right side of the fireplace to remove (Figure 7).
5.Remove Upper Light Bracket (Figure 7).
6.Upper bulbs are located in the upper left and upper right corners of the fireplace.
7.Unscrew bulbs counter clockwise.
8.Insert new bulbs and screw in clockwise.
9.
10.Slide front glass back into position and attach trim.
Purifire™ Filter
The Purifire™ filter supplied in your fireplace is reusable and washable. The filter should be cleaned or replaced on average once a year. To clean the filter gently tap filter on a hard surface to dislodge any loose dirt or debris, and then clean with water. No soap or cleaning products are recommended. The filter size
is 20 x 10 x 1 inches, rated at MERV 10.
To replace filter:
1.Remove fireplace from mantel.
2.Filter can be accessed from
the top rear of the unit (Figure 9).
3.Grasp filter and slide filter straight up.
4.Replace or clean filter.
!NOTE: If after market air filter is used ensure it is installed according to the manufacturer’s recommended instructions.
Figure 9 |
Purifire™ |
Filter |
Glass Cleaning
The glass is cleaned in the factory during the assembly operation. During shipment, installation, handling, etc., the clear door may collect dust particles, these can be removed by dusting lightly with
17
