Dimplex SI 100ZS, SI 75ZS, SI 50ZS manual Accessories, Transport, Connecting Flanges

ACCESSORIES TRANSPORT

4ACCESSORIES

4.1 Connecting Flanges

The use of flat-sealing connecting flanges allows the unit, as an option, to be connected by means of flanges.

5TRANSPORT

For the transport by means of a hand truck or boiler trolley, position the latter under the front end of the unit below the transport security device.

For transport on a level surface, the unit can be lifted from the rear or from the front by means of a lift truck or forklift. In this case, the transport securing device is not imperative.

45°

45°

CAUTION! The heat pump must not be tilted more than max. 45° (in either direction).

After the transport, the transport securing device is to be removed on either side at the bottom of the unit.

Remove/install transport securing device

CAUTION! The transport securing device is to be removed after the transport.

5