Dimplex V1525RT, V1525BT manual Fireplace Junction BOX

Figure 7

7.Route the power supply wire through the knockout on supplied alternative junction box cover and secure with a wire clamp (not supplied) (FIGURE 7.)

8.Connect the black wire (live) from the unit to the black wire from power supply. (FIGURE 7.)

9.Connect the white wire (neutral) from the unit to the white wire from power supply. (FIGURE 7.)

10.Connect the green wire (ground) from the unit to the green wire from power supply.

(FIGURE 7.)

FIREPLACE JUNCTION BOX

WHITE WIRE (N)

BLACK WIRE (L)

GREEN WIRE (G)

WHITE WIRE (N)

BLACK WIRE (L)

GREEN WIRE (G)

120V

POWER

SUPPLY

(BREAKER

PANEL)

11. Place all connectors inside the unit and secure the junction box cover to unit. Ensure that the cable clamp grips only the jacket of service cable.

NOTE

All wiring must be completed prior to installing the unit into the wall.

12. Place unit in position in the opening, push straight in and attach unit to studs using No. 10 fasteners. Attach supplied wall cover brackets to the top and the bottom of fireplace to cover

the gap on the dry wall (Figure 8)

11