C. Heater Thermostat Control
To adjust the temperature to your individual requirements, turn the thermostat control upward all the way to turn on the heater. When the room reaches the desired temperature, turn the thermostat knob downward until you hear a click. Leave in this position to maintain the room temperature at this setting. For additional heat, turn upward until you hear the click again and the heater will turn on.
Resetting The Temperature Cutoff Switch
Should the heater overheat, an automatic cut out will turn the fireplace off and it will not come back on without being reset. It can be reset by switching the Main ON/OFF switch to OFF and waiting 5 minutes before switching the unit back on.
CAUTION
If you need to continuously reset the heater, disconnect power and call Dimplex customer service at
Remote Operation
The Fireplace is supplied with an integrated on/off remote control
Note: Ensure that the fireplace Main ON/OFF switch is set to the remote
Control setting.
To operate, push the ON button to turn fireplace on, push the OFF button o turn the fireplace off.
14