Dimplex V1525BT, V1525RT Bulb Replacement Instructions, Helpful Hints, Light Bulb Requirements

Helpful Hints

It is a good idea to replace all light bulbs at one time if they are close to the end of their rated life. Group replacement will reduce the number of times you need to open the unit to replace light bulbs.

Light Bulb Requirements

Quantity of two 40W Chandelier or candelabra bulbs with E-12 (small) socket base, 120 Volt.

DO NOT EXCEED 40 WATTS PER BULB

Bulb Replacement Instructions:

1.Disconnect power supply to the fireplace either by unplugging the fireplace or switch off at the breaker panel.

2.Remove fireplace front trim.

3.Remove glass assembly. Remove the screws securing the glass assembly on the chassis. Hold on to the handles on the glass assembly with both hands then lift the whole assembly straight up to remove. Figure 10.

4.Remove the two screws securing the light block as shown in Figure 11, then remove the light block.

5.Reach in and turn the burnt-out bulb(s) counter- clockwise to remove.

6.Replace with new bulbs.

7.Reassemble light block, glass assembly and fireplace frame in reverse order.

Glass Assembly

HandleHandle

LIFT TO

REMOVE

Figure 10

16