Dimplex WRCPF-KIT owner manual Product Overview, BF33STP BF33DXP BF39STP BF39DXP BF45DXP

Product Overview

The Wall Switch Remote Control Kit is designed to work with the following Dimplex electric fireplaces:

•BF33STP

•BF33DXP

•BF39STP

•BF39DXP

•BF45DXP

•BFSL33

•BLF50

•DF3033ST

•DFG3033BLK

For the BF units, mentioned above, follow the Remote Receiver control installation instructions starting on page 5.

For fireplace models BFSL33, BLF50, DF3033ST and DFG3033, the pre-installed remote receiver in these models is compatible with the Wall Switch Remote Control. The Remote Receiver and bracket contained in this kit will not be required, proceed directly to the Wall Control Installation on page 7.

!NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio

or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

·Reorient or relocate the receiving antenna.

·Increase the separation between the equipment and the receiver.

·Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

·Consult the dealer or an experienced radio/TV technician for help.

Operation is subject to the following two conditions: (1) this device may not cause interference and; (2) this device must accept any interference, including interference that may cause undesired operation of the device.

4 www.dimplex.com