4.Remote Turn On - This terminal turns on the amplifier when (+) 12 volt is applied to it. Connect it to the remote turn on lead of the head unit or signal source. If a (+) 12 volt remote turn lead is not avail- able, a Remote Power Adapter (P/N #55000) can be used to supply a remote turn on signal. DO NOT connect this terminal to constant (+) 12 volt.
5.Ground - Connect this terminal directly to the sheet metal chassis
of the vehicle using the shortest wire necessary to make this connection. Always use wire of the same gauge or larger than the (+) 12 volt power wire. The chassis connection point should be scraped free of paint and dirt. Use only quality crimped and/or soldered connectors at both ends of this wire. DO NOT connect this terminal directly to the vehicle battery ground terminal or any other factory ground points.
FIGURE 2—AMPLIFIER CONNECTIONS 600/4 REAR
FRONT
REAR
| 1 | 2 | 3 | 4 | 5 |
| BRIDGED | FUSE |
|
|
|
L | R |
|
|
| |
|
| 25A x 2 | BATT | REM | GND |
|
| SPEAKER |
|
|
|
|
| OUTPUT |
|
|
|
© 2003 Directed Electronics, Inc | 9 |
