INSTALLATION GUIDELINES

1.Please read this owner’s manual carefully before installing this ampli- fier.

2.Disconnect the battery ground terminal prior to making any elec- trical connections.

3.Check for any hazards or obstruc- tions such as gas tanks, fuel or brake lines, and wiring harnesses before mounting the amplifier.

4.Pick a mounting location that will provide adequate access and venti- lation and protect the amplifier from heat, moisture, and dirt.

5.Avoid sharp metal areas when routing cables to the amplifier, and run RCA cables away from the power cables and other potentially noisy car harnesses.

6.The amplifier should be grounded with a short, heavy gauge wire connected directly to the car at a bare metal surface, preferably scraped body sheet metal. Do not use factory ground locations, seat bolts, or brackets that are spot welded.

7.Always fuse your power connection within 8 to 10 inches of the battery

terminal. Use a fuse or circuit breaker rated slightly more than the

on-board fuse(s) of the amplifier(s). The gauge of power wire used should take into account the total current draw of the system, and the length of wire used. IASCA and other auto sound competition organizations have charts available for this; you can also find a chart in the MECP study guide. Minimum wire gauge recom- mendations for the individual ampli- fiers are listed on the specification page. Always use the same gauge wire for the amplifier ground that you use for the power wire. Be sure to examine the battery ground cable of the vehicle, and if neces- sary, upgrade it by adding an addi- tional ground wire that is the same gauge as the amplifier’s power wire. Remember, the amplifier can only deliver its rated output when it is not current limited by the power and ground supply wires.

8.This amplifier is designed to drive a speaker load that measures from 2 to 8 ohms. Keep in mind that heat is the long-term enemy of automo- tive electronics and the lower your

6

© 2003 Directed Electronics, Inc

Page 5 Page 7
Page 6
Image 6
Directed Audio 600/4 manual Installation Guidelines
Page 5 Page 7

600/4 specifications

The Directed Audio 600/4 is a high-performance, multi-channel amplifier designed to enhance the audio experience in automotive applications. This amplifier is particularly sought after for its combination of power, efficiency, and sound quality, making it a favorite among car audio enthusiasts.

One of the standout features of the Directed Audio 600/4 is its power output. The amplifier delivers an impressive 150 watts RMS per channel at 4 ohms and 300 watts per channel at 2 ohms. This allows users to drive a wide range of speakers, from factory systems to high-performance aftermarket setups. The robust power handling ensures that the amplifier can deliver clean, distortion-free sound at high volumes.

The Directed Audio 600/4 incorporates advanced technologies that contribute to its superior performance. Notably, it features a high-performance MOSFET power supply, which ensures efficient operation and minimizes heat generation. This design not only enhances reliability but also extends the amplifier's lifespan, making it a solid investment for those seeking long-term audio solutions.

Another key characteristic of the 600/4 is its versatile configuration options. The amplifier offers multiple channels, allowing users to adapt it to various setups. Whether running a complete component system with separate tweeters and woofers or bridging channels for subwoofer applications, this amplifier can be tailored to meet the specific needs of any audio system.

Additionally, the Directed Audio 600/4 features built-in crossover options, enabling users to fine-tune the frequency response to suit their speakers and personal preferences. The adjustable high-pass and low-pass filters provide the flexibility needed to achieve the perfect soundstage, making it easier to create a custom audio environment.

For added convenience, the amplifier is equipped with a remote gain control option, allowing users to adjust the amplifier's output from the front of the vehicle without needing to reach into the trunk or back seat.

In conclusion, the Directed Audio 600/4 stands out for its powerful performance, efficient technologies, and flexibility. With features that cater to both novice and experienced users, it represents an excellent choice for anyone looking to enhance their vehicle’s audio system.
Top Page Image Contents